0.8mm Pitch FPC FFC Connector Top Entry Pull Tab JUSHUO AFC08-S24ECA-00 Flexible Flat Cable Connector

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The AFC08-S**ECA-00 is a 0.8mm pitch FPC/FFC connector with a top-entry, pull-tab design. It is suitable for flexible flat cable connections and is manufactured by SHENZHEN JUSHUO ELECTRONICS CO.,LTD.

Product Attributes

Brand: JUSHUO ()
Origin: China
Material: Main body: LCP UL 94V-0; Housing Lock: LCP UL 94V-0; Terminal/Contact: Phosphor Bronze (plated with Tin)
Color: Black (Housing Lock), Natural (Main body)
Certifications: RoHS compliant

Technical Specifications

Item	Specification	Test Condition	Requirement
[3] RATINGS
Rated Voltage (MAX)			50V
Rated Current (MAX)	[AC/DC(effective value)50Hz]		0.5A
Ambient temperature Range			-45 +85
[4] PERFORMANCE
4.1 Electrical Performance
Contact Resistance		Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.	20 m MAX
Insulation Resistance		Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.	500M MIN
Dielectric Strength		Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Locking and Withdrawal Force		Insert and extract applicable FFC at the speed rate of 253mm/minute.	Locking: 1.96n (N) MAX; Withdrawal: 0.49n (N) MIN
Terminal/Housing Retention Force		Pull the terminal at the speed rate of 253mm per minute	3.92N MIN
4.3 Environmental Performance and Others
Repeated Insertion and Withdrawal		Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute	Contact Resistance: 60 m MAX
Temperature Rise		Carrying rated current load. (UL 498)	30 MAX
Vibration		DC 1mA energizing state; vibration along XYZ three directions; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours	Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage
Shock		DC 1mA energizing state; along mutually perpendicular 6 directions; impact with 490m/s2{50G}; 3 times each	Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage
Heat Resistance		Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours	Contact Resistance: 60 m MAX; Appearance: No Damage
Cold Resistance		Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours	Contact Resistance: 60 m MAX; Appearance: No Damage
Humidity		Mate applicable FPC/FFC; place in 402, 90-95% relative humidity air for 96 hours; then measure within 0.5 hours after returning to room temperature	Insulation Resistance: 20 M MIN; Contact Resistance: 60 m MAX; Appearance: No Damage
Temperature Cycling		5 cycles of: -452 30 minutes; 852 30 minutes; with intermediate steps at room temperature	Contact Resistance: 60 m MAX; Appearance: No Damage
Salt Spray		Mate applicable FPC/FFC; 484 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water; then dry at room temperature.	Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion
SO2 Gas		Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402.	Contact Resistance: 60 m MAX; Appearance: No Damage
NH3 Gas		Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Contact Resistance: 60 m MAX; Appearance: No Damage
Solderability		Soldering Time: 20.5 sec. Soldering Temperature: 2355. 0.2 mm from terminal tip.	Solder Wetting: 95% coverage
Resistance to Soldering Heat		Soldering Time: 50.5 sec. Soldering Temperature: 2605. 0.2 mm from terminal tip.	Appearance: No Damage, Deformation