Horizontal SMT connector latch 1.25mm pitch JUSHUO GH125-S15DCA-00 component technical specifications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product acknowledgment document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It covers standard ratings, packaging, transportation, storage, component materials, appearance, electrical characteristics, environmental characteristics, and mechanical properties. This specification is applicable to the GH series products.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: Shenzhen, China
Certifications: ROHS environmental protection requirements

Technical Specifications

Item	Specifications	Test Method	Performance Requirements
4. Standard Rating
Rated voltage	50V
Rated current	1.0A AC/DC
Operating temperature range	-2585
Operating humidity range	Relative humidity is below 90%
7. Component Name/Material
Part name	Model	Material
Base	GH	LCP E130i
Pin	GH	Phosphor copper
Stator	GH	Phosphor copper
9. Electrical Characteristics
Contact resistance		Plug in the connector and test with a contact resistance meter.	20m Max
Insulation resistance		Apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	500M Min
Withstand voltage		Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown and flashover
10. Environmental Characteristics
Heating test	Appearance: no damage. Contact resistance: 60m Max.	Place plug connector in +852 for 96H, then in normal environment for 1-2H.
Cold tolerance test	Appearance: no damage. Contact resistance: 60m Max.	Place plug connector in -252 for 96H, then in normal environment for 1-2H.
Moisture resistance test	Appearance: no damage. Insulation resistance: 60M Min. Withstand voltage: 250V AC/minute MIN.	Place plug connector in 402, 90-96% RH for 96H, then in normal environment for 1-2H.
Temperature cycle	Appearance: no abnormality. Contact resistance: 60m Max.	5 cycles of -253 (30min), room temp (1H), +853 (30min), room temp (1H), then recover 2H.
Salt Spray Test	Appearance: no damage or corrosion. Contact resistance: 60m Max.	Continuous spray with 51% NaCl solution for 24H, then rinse with distilled water and recover 1-2H.
Weldability	Tin area above 95%	Dip in 2605 tin solution for 2.50.5 seconds.
Soldering resistance	1. Plastic parts: no obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications.	Reflow or wave soldering at 2605 for 51S.
11. Mechanical Properties
Pin fixing force	Single pin 5N min	Apply force at front end of pin at 253mm/min rate until pin withdraws.
Terminal retention in plastic parts	Single terminal: 7N min	Pull terminal from socket at 253mm/min rate along wire direction.
Mechanical life	Contact resistance: 80m Max	Plug and unplug 30 times at 10 times/min speed without power.
Terminal crimp wire strength	26AWG wire 17.8N	Axial pullout force at 253mm/min rate.
Terminal crimp wire strength	28AWG wire 8.9N	Axial pullout force at 253mm/min rate.
Terminal crimp wire strength	30AWG wire 4.4N	Axial pullout force at 253mm/min rate.
Terminal crimp wire strength	32AWG wire 2.2N	Axial pullout force at 253mm/min rate.
Insertion/Pull-out force	Insertion force 2N(Per pin) Pullout force 0.3N(Per pin)	Fit hole seat and terminal, insert/remove on same axis. Remove lock. Test speed: 205mm/min.