1.25mm Pitch Horizontal SMT Connector with Latch JUSHUO GH125-S10DCA-00 Rated Voltage 50V Current 1A
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product acknowledgement document details the specifications for the 1.25mm pitch horizontal SMT connector with a latch, model GH125-S**DCA-00. It outlines standard ratings, packaging, transport, storage, component materials, appearance, electrical, environmental, and mechanical characteristics.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
- Origin: China
- Certifications: ROHS
Technical Specifications
| Item | Specification | Details | |
| Product Name | 1.25mm Pitch Horizontal SMT Connector (with Latch) | GH125-S**DCA-00 (** indicates PIN count) | |
| Version | 1 | Page 1 of 8 | |
| Standard Rating | Rated Voltage | 50V | |
| Standard Rating | Rated Current | 1.0A AC/DC | |
| Standard Rating | Operating Temperature Range | -2585 | |
| Standard Rating | Operating Humidity Range | Below 90% RH | |
| Environmental Protection | Complies with ROHS environmental requirements. | ||
| Packaging | Inner packaging is joint and several, outer packaging is carton. Product sealed in box, no shaking. | ||
| Transport | Allowed by any means, avoid rain/snow/sunlight, no collision/extrusion. Transport temperature: -20 to +50. | ||
| Storage | Store in warehouse with temperature -20+50, RH 90%, free from corrosive gases. | ||
| Component: Base | Material | LCP E130i | |
| Component: Pin | Material | Phosphor Copper | |
| Component: Stator | Material | Phosphor Copper | |
| Appearance | Plastic parts: no obvious scars, mottled, cracked, burr, flash, material deficiency, or deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, or mechanical damage. | ||
| Electrical: Contact Resistance | Test Method | Plugged connector tested with contact resistance meter. | 20m Max |
| Electrical: Insulation Resistance | Test Method | Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min |
| Electrical: Withstand Voltage | Test Method | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown or flashover. |
| Environmental: Heat Test | Condition | +852 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 60m Max. |
| Environmental: Cold Test | Condition | -252 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 60m Max. |
| Environmental: Moisture Resistance | Condition | 402, 90-96% RH for 96H, then 1-2H at normal temp. | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/min MIN. |
| Environmental: Temperature Cycle | Condition | 5 cycles of -25 (30min) -> Room Temp (1H) -> +85 (30min) -> Room Temp (1H). Recover 2H. | Appearance: No abnormality. Contact Resistance: 60m Max. |
| Environmental: Salt Spray Test | Condition | 5% NaCl solution, 24H spray. Wash with distilled water, recover 1-2H. | Appearance: No damage/corrosion. Contact Resistance: 60m Max. |
| Environmental: Solderability | Condition | Dip in 2605 tin solution for 2.50.5 seconds. | Tin coverage 95%. |
| Environmental: Soldering Resistance | Condition | Reflow or wave soldering at 2605 for 51S. | Plastic parts: no obvious deformation/damage/blistering. Electrical characteristics must meet specifications. |
| Mechanical: Pin Fixing Force | Rate | 253mm/min | 5N Min (per pin) |
| Mechanical: Terminal Retention | Rate | 253mm/min | 7N Min (per terminal) |
| Mechanical: Mechanical Life | Cycles | 30 cycles at 10 cycles/min | Contact Resistance: 80m Max. |
| Mechanical: Terminal Crimp Wire Strength | Rate | 253mm/min | 26AWG: 17.8N; 28AWG: 8.9N; 30AWG: 4.4N; 32AWG: 2.2N. |
| Mechanical: Insertion/Extraction Force | Rate | 205mm/min | Insertion: 2N (per pin); Extraction: 0.3N (per pin). Remove hole seat lock. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina