1.0mm Pitch Horizontal SMT Connector JUSHUO AFC10-S03QCA-00 ROHS Certified with Electrical Performance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Acknowledgement
This document serves as a Product Acknowledgement for the 1.0mm Pitch Horizontal SMT Connector, model AFC10-S**QCA-00. This specification is applicable to the 1.0 series products.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.0mm Pitch Horizontal SMT Connector
- Product Model: AFC10-S**QCA-00
- Version: 1.0
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Test Method | Performance Requirement |
|---|---|---|---|
| Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 0.5A AC/DC | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Below 90% Relative Humidity | ||
| Packing | |||
| Inner Packing | Joint and several | ||
| Outer Packing | Carton, sealed in the box, do not shake | ||
| Transport | |||
| Conditions | Avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50 | ||
| Storage | |||
| Conditions | Ambient temperature: -20 to +50, Relative humidity: 90%, no corrosive gases | ||
| Part Name/Material | |||
| Part Name | Model | Material | |
| Base | 1.0 LCP E130i | LCP | |
| Reed | 1.0 | Phosphor Copper | |
| Stator | 1.0 | Phosphor Copper | |
| Appearance | |||
| Plastic Parts | Free of obvious scars, mottled, cracked, burr, flash, lack of material, and deformation affecting use. | ||
| Metal Parts | Smooth and clean surface, no rust, oxidation, peeling, blackening, or obvious mechanical damage. | ||
| Electrical Characteristics | |||
| Contact Resistance | Plug in connector, test with contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 100M Min | |
| Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| Environmental Characteristics | |||
| Heating Test | Place plug connector in +1052 environment for 96H, then test after 1-2H recovery. | Appearance: no damage. Contact Resistance: 30m Max | |
| Cold Tolerance Test | Place plug connector in -252 environment for 96H, then test after 1-2H recovery. | Appearance: no damage. Contact Resistance: 30m Max | |
| Moisture Resistance Test | Place plug connector in 402, 90-96% RH environment for 96H, then test after 1-2H recovery. | Appearance: no damage. Insulation Resistance: 50M MIN. Withstand Voltage: 200VAC/min | |
| Temperature Cycle | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Test after 2H recovery. | Appearance: no abnormality. Contact Resistance: 30m Max | |
| Salt Spray Test | Continuous spray with 5%1% NaCl solution for 24H. Wash with distilled water, test after 1-2H recovery. | Appearance: no damage or corrosion. Contact Resistance: 30m Max | |
| Weldability | Dip in 2355 tin solution for 2.50.5 seconds. | Tin area 95% | |
| Soldering Resistance | Place connector on PCB, undergo 2605 reflow or wave soldering for 51S. | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | |
| Mechanical Properties | |||
| Pin Fixing Force | Apply force at pin front end at 253mm/min rate until pin withdraws. | Single Pin: 7N Min | |
| Terminal Retention in Plastic Parts | Pull terminal from socket at 253mm/min rate along conductor direction. | Single Terminal: 5N Min | |
| Mechanical Life | Plug and unplug 50 times at 10 times/min speed (no power). | Contact Resistance: 30m Max | |
| Insert/Draw Force | Match socket and terminal, test insert/plug on same axis. Remove lock during test (205mm/minute). | See table below for PIN position specific values. | |
| PIN Position | Insert (N) | Pull Out (N) | PIN Position | Insert (N) | Pull Out (N) |
|---|---|---|---|---|---|
| 1 | 3.00 | 0.50 | 9 | 29.00 | 5.50 |
| 2 | 8.00 | 2.00 | 10 | 32.00 | 6.00 |
| 3 | 11.00 | 2.50 | 11 | 35.00 | 6.50 |
| 4 | 14.00 | 3.00 | 12 | 38.00 | 7.00 |
| 5 | 17.00 | 3.50 | 13 | 41.00 | 7.50 |
| 6 | 20.00 | 4.00 | 14 | 44.00 | 8.00 |
| 7 | 23.00 | 4.50 | 15 | 47.00 | 8.50 |
| 8 | 26.00 | 5.00 | 16 | 50.00 | 9.00 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina