SMT Connector Horizontal 1.25mm Pitch with Latch JUSHUO GH125-S13DCA-00 Rated Voltage 50V and Current 1A
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product acknowledgment document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It covers standard ratings, environmental characteristics, electrical and mechanical properties, as well as packaging, transport, and storage guidelines. This specification is applicable to the GH series products.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
| Standard Rating | |||
| Rated voltage | 50V | ||
| Rated current | 1.0A AC/DC | ||
| Operating temperature range | -2585 | ||
| Operating humidity range | Relative humidity is below 90% | ||
| Environmental Protection | |||
| Compliance | Products in line with ROHS environmental protection requirements. | ||
| Packing | |||
| Inner/Outer Packing | Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | ||
| Transport | |||
| Conditions | Allowed by any means, avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. | ||
| Storage | |||
| Conditions | Ambient temperature: -20 to +50, relative humidity 90%, no acid, alkaline, or other corrosive gases. | ||
| Part Name/Material | |||
| Base | GH LCP E130i | ||
| Pin | GH Phosphor copper | ||
| Stator | GH Phosphor copper | ||
| Electrical Characteristics | |||
| Contact Resistance | Plug in connector, test with contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min | |
| Withstand Voltage | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| Environmental Characteristics | |||
| Heating Test (+852, 96H) | Appearance: No damage. Contact Resistance: 60m Max. | ||
| Cold Test (-252, 96H) | Appearance: No damage. Contact Resistance: 60m Max. | ||
| Moisture Resistance (402, 90-96% RH, 96H) | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN. | ||
| Temperature Cycle (-25 to +85, 5 cycles) | Appearance: No abnormalities. Contact Resistance: 60m Max. | ||
| Salt Spray Test (51% NaCl, 24H) | Appearance: No damage, corrosion. Contact Resistance: 60m Max. | ||
| Weldability | Dip in 2605 tin solution for 2.50.5 seconds. | Tin area 95% | |
| Soldering Resistance (2605 reflow/wave soldering, 51S) | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | ||
| Mechanical Properties | |||
| Pin Fixing Force | Apply force on pin front end at 253mm/min rate until pin withdraws. | Single pin 5N Min | |
| Terminal Retention in Plastic Parts | Pullout force along wire direction at 253mm/min rate. | Single terminal: 7N Min | |
| Mechanical Life (30 cycles, 10 cycles/min) | Under no power on state. | Contact resistance: 80m Max | |
| Terminal Crimp Wire Strength | Axial pullout force at 253mm/min rate. | 26AWG: 17.8N; 28AWG: 8.9N; 30AWG: 4.4N; 32AWG: 2.2N | |
| Insertion/Pullout Force | Fit hole seat and terminal, test insertion/removal on same axis. Remove lock of hole seat. Test speed: 205mm/min. | Insertion force: 2N(Per pin); Pullout force: 0.3N(Per pin) | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina