Durable Electrical Connector JUSHUO GH125-S14CCA-00 1.25mm Pitch Horizontal SMT Connector with Latch

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This Product Acknowledgement document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It covers standard ratings, packaging, transportation, storage, component materials, appearance, electrical, environmental, and mechanical characteristics. The product conforms to ROHS environmental requirements and is designed for various applications requiring reliable electrical connections.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: China
Certifications: ROHS

Technical Specifications

Item	Specifications	Test Method	Performance Requirements
Standard Rating
Rated Voltage	50V
Rated Current	1.0A AC/DC
Operating Temperature Range	-2585
Operating Humidity Range	Below 90% Relative Humidity
Component Materials
Part Name	Model	Material
Base	GH	LCP E130i
Pin	GH	Phosphor Copper
Stator	GH	Phosphor Copper
Electrical Characteristics
Contact Resistance		Plug in the connector and test with a contact resistance meter.	20m Max
Insulation Resistance		Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute.	500M Min
Withstand Voltage		Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown and flashover
Environmental Characteristics
Heating Test	Appearance: No damage. Contact resistance: 60m Max.	Place plug connector in +852 environment for 96H, then test after 1-2H recovery.
Cold Tolerance Test	Appearance: No damage. Contact resistance: 60m Max.	Place plug connector in -252 environment for 96H, then test after 1-2H recovery.
Moisture Resistance Test	Appearance: No damage. Insulation resistance: 60M Min. Withstand voltage: 250V AC/minute MIN.	Place plug connector in 402, 90-96% RH environment for 96H, then test after 1-2H recovery.
Temperature Cycle	Appearance: No abnormalities. Contact resistance: 60m Max.	5 cycles of -253 (30 min) -> Room Temp (1H) -> +853 (30 min) -> Room Temp (1H), then 2H recovery.
Salt Spray Test	Appearance: No damage or corrosion. Contact resistance: 60m Max.	Continuous spray with 51% NaCl solution for 24H, then wash and recover for 1-2H.
Weldability	Tin area: Above 95%.	Dip the weldable part into 2605 tin solution for 2.50.5 seconds.
Soldering Resistance	1. Plastic parts: No obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications.	Reflow or wave soldering at 2605 for 51S.
Mechanical Properties
Pin Fixing Force	Single pin: 5N min	Apply force at the front end of the pin at a rate of 253mm/min until withdrawn.
Terminal Retention in Plastic Parts	Single terminal: 7N min	Pull terminal out of socket at a rate of 253mm/min along conductor direction.
Mechanical Life	Contact resistance: 80m Max.	Plug and unplug 30 times at a speed of 10 times/min without power.
Terminal Crimp Wire Strength	26AWG wire: 17.8N. 28AWG wire: 8.9N. 30AWG wire: 4.4N. 32AWG wire: 2.2N.	Axial pullout force at 253mm/min.
Insertion/Pullout Force	Insertion force: 2N(Per pin). Pullout force: 0.3N(Per pin).	Fit hole seat and terminal, test insertion/removal on the same axis. Remove hole seat lock. Test speed: 205mm/min.