1.25mm Pitch Vertical SMT Connector with Latch JUSHUO GH125-S03CCA-00 Featuring Phosphor Copper Pins

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document is a product acknowledgment for the 1.25mm Pitch Vertical SMT Connector (with Latch), model GH125-S**CCA-00, manufactured by SHENZHEN JUSHUO ELECTRONIC CO.,LTD. It details the product's specifications, electrical and mechanical characteristics, and environmental performance.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: China
Certifications: ROHS compliant

Technical Specifications

Item	Specifications	Test Method	Performance Requirements
2. Standard Rating
Rated Voltage	50V
Rated Current	1.0A AC/DC
Operating Temperature Range	-2585
Operating Humidity Range	Below 90% Relative Humidity
7. Part Name/Material
Part Name	Model	Material
Base	GH LCP E130i	LCP
Pin	GH Phosphor Copper	Phosphor Copper
Stator	GH Phosphor Copper	Phosphor Copper
9. Electrical Characteristics
Contact Resistance		Plug in the connector and test with a contact resistance meter.	20m Max
Insulation Resistance		Plug in the connector and apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	500M Min
Withstand Voltage		Plug in the connector and apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown and flashover
10. Environmental Characteristics
Heating Test		Place plug connector in +852 environment for 96H, then recover in normal environment for 1-2H.	Appearance: No damage; Contact Resistance: 60m Max
Cold Tolerance Test		Place plug connector in -252 environment for 96H, then recover in normal environment for 1-2H.	Appearance: No damage; Contact Resistance: 60m Max
Moisture Resistance Test		Place plug connector in 402, 90-96% RH environment for 96H, then recover in normal environment for 1-2H.	Appearance: No damage; Insulation Resistance: 60M Min; Withstand Voltage: 250V AC/minute MIN
Temperature Cycle		5 cycles of -253 (30min) -> Room Temp (1H) -> +853 (30min) -> Room Temp (1H), then recover for 2H.	Appearance: No abnormalities; Contact Resistance: 60m Max
Salt Spray Test		Continuous spray with 5%1% NaCl solution for 24H, wash with distilled water, recover for 1-2H.	Appearance: No damage or corrosion; Contact Resistance: 60m Max
Weldability		Dip in 2605 tin solution for 2.50.5 seconds.	Tin area above 95%
Soldering Resistance		Place connector on PCB and subject to 2605 reflow or wave soldering for 51S.	1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications.
11. Mechanical Properties
Pin Fixing Force		Apply force at a rate of 253mm/min.	Single Pin: 5N Min
Terminal Retention in Plastic Parts		Pull terminal from socket at a rate of 253mm/min along conductor direction.	Single Terminal: 7N Min
Mechanical Life		Plug and unplug 30 times at a speed of 10 times/min without power.	Contact Resistance: 80m Max
Terminal Crimp Wire Strength		Axial pullout force at a rate of 253mm/min.	26AWG Wire: 17.8N; 28AWG Wire: 8.9N; 30AWG Wire: 4.4N; 32AWG Wire: 2.2N
Insertion/Pull-out Force		Fit hole seat and terminal, test insertion/removal on the same axis, remove lock of hole seat (test speed: 205mm/min).	Insertion Force: 2N (Per pin); Pull-out Force: 0.3N (Per pin)