2 Amp Rated Horizontal SMT Connector JUSHUO AFC20-S09ACA-00 2.0 Millimeter Pitch Electrical Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product acknowledgment document pertains to the 2.0mm pitch horizontal SMT connector, model AFC20-S**ACA-00. It outlines the product's specifications, environmental characteristics, and mechanical properties, ensuring compliance with industry standards and customer requirements.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: Shenzhen, China
Certifications: ROHS environmental protection requirements

Technical Specifications

Item	Specifications	Test Method	Performance Requirements
2. Standard Rating
Rated voltage	250V AC/DC
Rated current	2.0A
Operating temperature range	-25+105
Operating humidity range	Relative humidity is below 90%
7. Part Name/Part Specification/Part Material
Part Name	Model	Material
Base	2.0 LCP E130i
Pin	2.0 Brass
Stator	2.0 Brass
9. Electrical Characteristics
Contact resistance		Plug in the connector and test with a contact resistance meter.	20m Max
Insulation resistance		Apply 1000V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	1000M Min
Withstand voltage		Apply 1000V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown and flashover
10. Environmental Characteristics
Heating test		Place plug connector in +1052 environment for 96H, then test after 1~2H in normal environment.	Appearance: no damage; Contact resistance: 30m Max
Cold tolerance test		Place plug connector in -252 environment for 96H, then test after 1~2H in normal environment.	Appearance: no damage; Contact resistance: 30m Max
Moisture resistance test		Place plug connector in 402, 90~96% RH environment for 96H, then test after 1~2H in normal environment.	Appearance: no damage; Insulation resistance: 500M Min; Withstand voltage: 600V AC/minute MIN
Temperature cycle		5 cycles of -253 (30min) -> Room temp (1H) -> +1053 (30min) -> Room temp (1H), recover 2H.	Appearance: no abnormality; Contact resistance: 30m Max
Salt Spray Test		Continuous spray with 51% NaCl solution for 24H, wash with distilled water, recover 1~2H.	Appearance: no damage, corrosion; Contact resistance: 30m Max
Weldability		Dip in 2455 tin solution for 2.50.5 seconds.	Tin area above 95%
Soldering resistance		Reflow or wave soldering at 2605 for 51S.	1. Plastic parts free from deformation, damage, blistering. 2. Electrical characteristics must meet specifications.
11. Mechanical Properties
PIN needle fixing force		Apply force at a rate of 253mm/min until pin withdraws.	Single pin: 10N Min
Terminal retention in plastic parts		Pull terminal out of socket at a rate of 253mm/min along conductor direction.	Single terminal: 7N Min
Mechanical life		Plug and unplug 50 times at 10 times/min under no power.	Contact resistance: 30m Max
Insertion/Pull-out force		Fit socket and terminal, test insertion/removal on the same axis (speed: 205mm/min), remove socket lock.	See detailed table below.

Hole Position	Insertion (N)	Pull out (N)	Hole Position	Insertion (N)	Pull out (N)
1	4.00	1.50	9	52.00	16.50
2	24.00	6.00	10	56.00	18.00
3	28.00	7.50	11	60.00	19.50
4	32.00	9.00	12	64.00	21.00
5	36.00	10.50	13	68.00	22.50
6	40.00	12.00	14	72.00	24.00
7	44.00	13.50	15	76.00	25.50
8	48.00	15.00	16	80.00	27.00