Durable 1.25mm Pitch Vertical SMT Connector JUSHUO GH125-S16CCA-00 Featuring Secure Latch Design

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the 1.25mm pitch vertical SMT connector with latch, model GH125-S**CCA-00. It details product confirmation, technical characteristics, and mechanical properties.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: Shenzhen, China
Certifications: ROHS

Technical Specifications

Item	Specifications	Test Method	Performance Requirements
Standard Rating
Rated Voltage	50V
Rated Current	1.0A AC/DC
Operating Temperature Range	-2585
Operating Humidity Range	Relative humidity is below 90%
Environmental Protection
Compliance	Products in line with ROHS environmental protection requirements.
Packing
Method	Inner packing is joint and several, outer packing is carton. Products sealed in the box, do not shake.
Transport
Conditions	Avoid rain, snow and sunlight. No mechanical damage such as collision and extrusion. Ambient temperature: -20 to +50.
Storage
Conditions	Ambient temperature: -20 to +50. Relative humidity not more than 90%. No acid, alkaline, and other corrosive gases.
Part Name/Material
Part Name	Model	Material
Base	GH LCP E130i
Pin	GH Phosphor copper
Stator	GH Phosphor copper
Electrical Characteristics
Contact Resistance		Plug in the connector and test with a contact resistance meter.	20m Max
Insulation Resistance		Apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	500M Min
Withstand Voltage		Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute.	No breakdown and flashover
Environmental Characteristics
Heating Test		Place plugged connector in +852 environment for 96H, then in normal environment for 1-2H.	Appearance: No damage. Contact Resistance: 60m Max
Cold Tolerance Test		Place plugged connector in -252 environment for 96H, then in normal environment for 1-2H.	Appearance: No damage. Contact Resistance: 60m Max
Moisture Resistance Test		Place plugged connector in 402, 90-96% RH environment for 96H, then in normal environment for 1-2H.	Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN
Temperature Cycle		Test samples cycled between -253 (30 min), room temp (1H), +853 (30 min), room temp (1H) for 5 cycles. Recover for 2H.	Appearance: No abnormalities. Contact Resistance: 60m Max
Salt Spray Test		Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover for 1-2H.	Appearance: No damage or corrosion. Contact Resistance: 60m Max
Weldability		Dip weldable part in 2605 tin solution for 2.50.5 seconds.	Tin area above 95%
Soldering Resistance		Place connector on PCB, reflow at 2605 for 51S or wave solder.	1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications.
Mechanical Properties
Pin Fixing Force		Fix pin holder, apply force at 253mm/min until pin exits.	Single pin: 5N Min
Terminal Retention in Plastic Parts		Pull terminal from socket at 253mm/min along conductor direction.	Single terminal: 7N Min
Mechanical Life		Plug and unplug 30 times at 10 times/minute without power.	Contact Resistance: 80m Max
Terminal Crimp Wire Strength		Axial pullout force at 253mm/min.	26AWG: 17.8N. 28AWG: 8.9N. 30AWG: 4.4N. 32AWG: 2.2N.
Insertion/Pullout Force		Fit socket and terminal, test insertion/removal on the same axis with lock removed (speed: 205mm/min).	Insertion Force: 2N (Per pin). Pullout Force: 0.3N (Per pin).