1.25mm pitch SMT connector horizontal with latch JUSHUO GH125-S07DCA-00 rated 50 volts 1 amp AC DC
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This document is a product acknowledgment for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It details the product's specifications, environmental characteristics, and mechanical properties, ensuring it meets standard requirements for various applications.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
- Product Name: 1.25mm( (1.25mm pitch horizontal SMT connector with latch)
- Product Model: GH125-S**DCA-00
- Origin: Shenzhen, China
- Certifications: ROHS compliant
Technical Specifications
| Item | Specifications/Requirements | Test Method |
| Standard Rating | ||
| Rated Voltage | 50V | |
| Rated Current | 1.0A AC/DC | |
| Operating Temperature Range | -2585 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Environmental Protection | ||
| Compliance | Products in line with ROHS environmental protection requirements. | |
| Packing | ||
| Method | Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | |
| Transport | ||
| Conditions | Avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. | |
| Storage | ||
| Conditions | Ambient temperature: -20 to +50, relative humidity not more than 90%, no acid, alkaline, or other corrosive gases. | |
| Part Name/Material | ||
| Base | GH LCP E130i | |
| Pin | GH Phosphor copper | |
| Stator | GH Phosphor copper | |
| Electrical Characteristics | ||
| Contact Resistance | 20m Max | Plug in connector, test with contact resistance meter. |
| Insulation Resistance | 500M Min | Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. |
| Withstand Voltage | No breakdown and flashover | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. |
| Environmental Characteristics | ||
| Heating Test (+85) | Appearance: No damage. Contact Resistance: 60m Max. | Place in +852 for 96H, then test after 1-2H at normal temp. |
| Cold Test (-25) | Appearance: No damage. Contact Resistance: 60m Max. | Place in -252 for 96H, then test after 1-2H at normal temp. |
| Moisture Resistance Test (40, 90-96% RH) | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN. | Place in 402, 90-96% RH for 96H, then test after 1-2H at normal temp. |
| Temperature Cycle (-25 to +85, 5 cycles) | Appearance: No abnormality. Contact Resistance: 60m Max. | -25 (30min) -> Room Temp (1H) -> +85 (30min) -> Room Temp (1H). Recover 2H. |
| Salt Spray Test (5% NaCl, 24H) | Appearance: No damage, corrosion. Contact Resistance: 60m Max. | Spray with 5% NaCl solution for 24H, wash with distilled water, recover 1-2H. |
| Weldability | Tin area above 95% | Dip in 2605 tin solution for 2.50.5 seconds. |
| Soldering Resistance | 1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | Reflow or wave soldering at 2605 for 51S. |
| Mechanical Properties | ||
| Pin Fixing Force | Single pin 5N min | Apply force at 253mm/min rate until pin withdraws. |
| Terminal Retention in Plastic Parts | Single terminal: 7N min | Pull terminal out of socket at 253mm/min rate along wire direction. |
| Mechanical Life | Contact Resistance: 80m Max. | Plug and unplug 30 times at 10 times/min speed without power. |
| Terminal Crimp Wire Strength | 26AWG wire: 17.8N; 28AWG wire: 8.9N; 30AWG wire: 4.4N; 32AWG wire: 2.2N | Axial pullout force at 253mm/min rate. |
| Insertion/Pullout Force | Insertion force: 2N(Per pin); Pullout force: 0.3N(Per pin) | Fit socket and terminal, insert/remove on same axis. Remove socket lock. (Test speed: 205mm/min) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina