Horizontal SMT Connector 2.5mm Pitch JUSHUO AFC25-S08DCA-00 with 250V AC DC Voltage Rating
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product acknowledgment document pertains to the AFC25-S**DCA-00, a 2.5mm pitch horizontal SMT connector. It details the product's specifications, electrical and mechanical characteristics, environmental requirements, and testing procedures. This document is intended for customer confirmation and approval.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Details |
| Product Name | 2.5mm | AFC25-S**DCA-00 |
| Version | 1 | Page 1 of 6 |
| Scope of Application | A1251 series products | |
| Standard Rating | Rated Voltage | 250V AC/DC |
| Rated Current | 3.0A | |
| Operating Temperature Range | -25+105 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Packing | Inner packing:, Outer packing: | Product sealed in box, no shaking |
| Transport Environment Temperature | -20 to +50 | Avoid rain, snow, sunlight; no collision or extrusion |
| Storage Environment | Temperature: -20+50, Relative humidity: 90% | Warehouse without acid, alkaline, or corrosive gases |
| Part Name/Material | Base | 2.5 LCP E130i |
| Pin | 2.5 Brass | |
| Stator | 2.5 Brass | |
| Appearance | Plastic parts: no obvious scars, mottled, cracks, burrs, flash, material shortage, or deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, or mechanical damage. | |
| Electrical Characteristics: Contact Resistance | Test Method | Connector plugged in, tested with contact resistance meter. |
| Performance Requirement | 20m Max | |
| Electrical Characteristics: Insulation Resistance | Test Method | Connector plugged in, 1000V DC applied between adjacent contacts and between contacts and enclosure for 1 minute. |
| Performance Requirement | 1000M Min | |
| Electrical Characteristics: Withstand Voltage | Test Method | Connector plugged in, 1000V AC applied between adjacent contacts and between contacts and enclosure for 1 minute. |
| Performance Requirement | No breakdown and flashover | |
| Environmental Characteristics: Heating Test | Test Method | Plugged connector in +1052 for 96H, recover 1-2H. |
| Performance Requirement | Appearance: no damage; Contact Resistance: 30m Max | |
| Environmental Characteristics: Cold Tolerance Test | Test Method | Plugged connector in -252 for 96H, recover 1-2H. |
| Performance Requirement | Appearance: no damage; Contact Resistance: 30m Max | |
| Environmental Characteristics: Moisture Resistance Test | Test Method | Plugged connector in 402, 90-96% RH for 96H, recover 1-2H. |
| Performance Requirement | Appearance: no damage; Insulation Resistance: 500M Min; Withstand Voltage: 800V AC/min ute MIN | |
| Environmental Characteristics: Temperature Cycle | Test Method | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover 2H. |
| Performance Requirement | Appearance: no abnormality; Contact Resistance: 30m Max | |
| Environmental Characteristics: Salt Spray Test | Test Method | (51)% NaCl solution, continuous spray 24H. Wash with distilled water, recover 1-2H. |
| Performance Requirement | Appearance: no damage/corrosion; Contact Resistance: 30m Max | |
| Environmental Characteristics: Weldability | Test Method | Dip in 2455 tin solution for 2.50.5 seconds. |
| Performance Requirement | Tin area 95% | |
| Environmental Characteristics: Soldering Resistance | Test Method | Place on PCB, reflow at 2605 for 51S or wave soldering. |
| Performance Requirement | 1. No obvious deformation, damage, blistering of plastic parts. 2. Electrical characteristics must meet specifications. | |
| Mechanical Properties: PIN Fixing Force | Test Method | Fix pin holder, apply force at 253mm/min until pin withdraws. |
| Performance Requirement | Single pin: 12N Min | |
| Mechanical Properties: Terminal Retention in Plastic Parts | Test Method | Terminal and socket fit, pull terminal from socket at 253mm/min along wire direction. |
| Performance Requirement | Single terminal: 15N Min | |
| Mechanical Properties: Mechanical Life | Test Method | Plug and unplug 50 times at 10 times/min without power. |
| Performance Requirement | Contact Resistance: 30m Max | |
| Mechanical Properties: Insertion/Pull-out Force | Test Method | (1) Fit socket and terminal, test insertion/removal on same axis as pin seat. Remove socket lock. Speed: 205mm/min. |
| Performance Requirement | See table in source document for detailed values per pin position. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina