Horizontal SMT connector rated current 0.5A JUSHUO AFC10-S07QCA-00 1.0mm pitch operating temperature range
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Acknowledgement
Customer: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Product Name: 1.0mm
Material number: AFC10-S**QCA-00 (**PIN)
Version: 1 1 version
Page: 2 of 8
Product Overview
This product specification applies to the 1.0 series of connectors. It details standard ratings, environmental characteristics, electrical characteristics, and mechanical properties for the AFC10-S**QCA-00 model, a 1.0mm pitch horizontal SMT connector.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
- Color: Not specified
Technical Specifications
| Item | Specification | Test Method | Performance Requirement | |||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard Rating | Rated Voltage: 50V AC/DC Rated Current: 0.5A Operating Temperature Range: -25+105 Operating Humidity Range: Below 90% RH | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Packing | Inner packing: Joint and several, Outer packing: Carton, sealed and secured. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Transport | Any means allowed, avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Storage | Ambient temperature: -20+50, Relative humidity: 90%, free from corrosive gases (acidic, alkaline). | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Part Name/Material | Base: LCP E130i Reed: Phosphor copper Stator: Phosphor copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Appearance | Plastic parts: free from scars, mottling, cracks, burrs, flash, material deficiency, deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, mechanical damage. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electrical Characteristics: Contact Resistance | 20m Max | Test with contact resistance meter after mating. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electrical Characteristics: Insulation Resistance | 100M Min | Apply 500V DC for 1 minute between adjacent contacts and between contacts and enclosure after mating. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electrical Characteristics: Withstand Voltage | No breakdown or flashover | Apply 500V AC for 1 minute between adjacent contacts and between contacts and enclosure after mating. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Heat Test | Appearance: No damage Contact Resistance: 30m Max | Place mated connector in +1052 for 96H, then recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Cold Test | Appearance: No damage Contact Resistance: 30m Max | Place mated connector in -252 for 96H, then recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Moisture Resistance | Appearance: No damage Insulation Resistance: 50M Min Withstand Voltage: 200VAC/min | Place mated connector in 402, 90-96% RH for 96H, then recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Temperature Cycle | Appearance: No abnormalities Contact Resistance: 30m Max | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover for 2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Salt Spray Test | Appearance: No damage, corrosion (Hardware: no severe corrosion exposing base metal; slight corrosion on blanking surface allowed if performance is not affected). Contact Resistance: 30m Max | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Solderability | Tin area above 95% | Dip in 2355 tin solution for 2.50.5 seconds. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental: Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | Place connector on PCB and subject to 2605 reflow or wave soldering for 51S. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Pin Fixing Force | Single pin: 7N Min | Fix pin holder, apply force at pin front end at 253mm/min rate until pin withdraws. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Terminal Retention in Plastic Parts | Single terminal: 5N Min | Match terminal with socket, pull terminal from socket at 253mm/min rate along wire direction. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Mechanical Life | Contact Resistance: 30m Max | Plug and unplug 50 times at a speed of 10 times/min without power. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical: Insert/Withdrawal Force | See table below | (1) Match socket and terminal, test insertion/withdrawal on the same axis as pin seat, remove lock during test (speed: 205mm/min). |
|
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina