Compact Design 1.0mm Pitch Vertical SMT Connector JUSHUO AFC10-S11PCA-00 for Electronics Assembly

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Acknowledgement

Customer: SHENZHEN JUSHUO ELECTRONIC CO.,LTD

Product Name: 1.0mm (1.0mm Pitch Vertical SMT Connector)

Material Number: AFC10-S**PCA-00 (**PIN / ** indicates PIN count)

Version: 1 1 version

Page: 2 of 8

Product Overview

This product specification applies to the 1.0mm pitch vertical SMT connector series, model AFC10-S**PCA-00. It is designed for applications requiring reliable electrical connections with a 1.0mm pitch, suitable for surface mount technology. The connector is built to meet stringent electrical, environmental, and mechanical performance requirements.

Product Attributes

Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Origin: Shenzhen, China
Certifications: ROHS environmental protection requirements
Color: Not specified

Technical Specifications

Item	Specification	Test Method	Performance Requirement
2. Standard Rating
Rated Voltage	50V AC/DC
Rated Current	0.5A
Operating Temperature Range	-25+105
Operating Humidity Range	Below 90% RH
7. Part Name/Material
Part Name	Material
Base	LCP E130i
Reed	Phosphor copper
Stator	Phosphor copper
9. Electrical Characteristics
Contact Resistance		Plugged connector, tested with contact resistance meter.	20m Max
Insulation Resistance		Plugged connector, 500V DC for 1 minute between adjacent contacts and between contacts and enclosure.	100M Min
Withstand Voltage		Plugged connector, 500V AC for 1 minute between adjacent contacts and between contacts and enclosure.	No breakdown and flashover
10. Environmental Characteristics
Heating Test		Plugged connector in +1052 for 96H, then 1-2H at normal temp.	Appearance: No damage. Contact Resistance: 30m Max
Cold Tolerance Test		Plugged connector in -252 for 96H, then 1-2H at normal temp.	Appearance: No damage. Contact Resistance: 30m Max
Moisture Resistance Test		Plugged connector in 402, 90-96% RH for 96H, then 1-2H at normal temp.	Appearance: No damage. Insulation Resistance: 50M MIN. Withstand Voltage: 200VAC/min
Temperature Cycle		5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H), then 2H recovery.	Appearance: No abnormalities. Contact Resistance: 30m Max
Salt Spray Test		Continuous spray with 51% NaCl solution for 24H, then rinse with distilled water and 1-2H recovery.	Appearance: No damage, corrosion. Contact Resistance: 30m Max
Weldability		Dip in 2355 tin solution for 2.50.5 seconds.	Tin area above 95%
Soldering Resistance		Reflow or wave soldering at 2605 for 51S on PCB.	1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications.
11. Mechanical Characteristics
PIN Fixing Force		Apply force at pin front end at 253mm/min until pin withdraws.	Single pin: 7N Min
Terminal Retention in Plastic Parts		Pull terminal out of socket at 253mm/min along wire direction.	Single terminal: 5N Min
Mechanical Life		Plug and unplug 50 times at 10 times/min without power.	Contact Resistance: 30m Max
Insert/Withdraw Force		Test methods: (1) Match socket and terminal, insert/pull on same axis, remove lock (205mm/min).	See detailed table below for PIN position specific values.

PIN Position	Insert (N)	Withdraw (N)	PIN Position	Insert (N)	Withdraw (N)
1	3.00	0.50	9	29.00	5.50
2	8.00	2.00	10	32.00	6.00
3	11.00	2.50	11	35.00	6.50
4	14.00	3.00	12	38.00	7.00
5	17.00	3.50	13	41.00	7.50
6	20.00	4.00	14	44.00	8.00
7	23.00	4.50	15	47.00	8.50
8	26.00	5.00	16	50.00	9.00