Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product specification covers the 1.25mm pitch wafer patch socket connectors, specifically the 1.25T-*PWT series. These connectors are designed for FPC/FFC mating and meet ROHS environmental requirements. They are suitable for a wide operating temperature range and are manufactured by SHENZHEN JUSHUO ELECTRONICS CO.,LTD.

Product Attributes

Brand: JUSHUO ()
Origin: Shenzhen, China
Material (Base): LCP E130i
Material (Pin/Stator): Phosphor copper
Certifications: RoHS
Packaging: Reel/Carton

Technical Specifications

Item	Specification	Condition	Requirement
Ratings
Rated Voltage (MAX)	100V
Rated Current (MAX)	1A [AC/DC(effective value)50Hz]	(including terminal temperature rise)
Ambient temperature Range	-45 +85
Electrical Performance
Contact Resistance		Plugged in	20 m MAX
Insulation Resistance		Apply 500V DC for 1 minute between adjacent contacts and between contacts and enclosure	500M MIN
Dielectric Strength		Mate FPC/FFC, apply 200V AC (effective value) for 1 minute between adjacent terminals or ground	No Breakdown
Mechanical Performance
Pin fixing force	Single pin	Applied force on pin front end at 253mm/min until withdrawal	5N MIN
Terminal Retention in Plastic parts	Single terminal	Force to pull terminal out of socket at 253mm/min along conductor direction	5N MIN
Environmental Performance
Heat Resistance		96 hours at +852, then 1-2 hours at normal temp.	Appearance: No Damage, Contact Resistance: 30 m MAX
Cold Resistance		96 hours at -452, then 1-2 hours at normal temp.	Appearance: No Damage, Contact Resistance: 30 m MAX
Humidity		96 hours at 452, 90-96% RH, then 1-2 hours at normal temp.	Appearance: No Damage, Insulation Resistance: 30 M MIN, Dielectric Strength: 500V AC/MIN
Temperature Cycling		5 cycles of: -453 (30min) -> Normal (1H) -> 853 (30min) -> Normal (1H)	Appearance: No Damage, Contact Resistance: 60 m MAX
Salt Spray Resistance		48 hours exposure to 5 1% salt spray at 452, then wash and dry	Appearance: No Damage, Corrosion: No Damage, Contact Resistance: 30 m MAX
Other Performance
Solder Ability		Dip in 2455 tin bath for 2.50.5 sec.	Tin Area: Above 95%, Appearance: No Damage
Soldering Resistance		Immerse in 2605 tin bath for 50.5 sec.	Tin Area: Above 95%, Appearance: No Damage, Deformation: No