Legion DC 511 2.5 DC Power Jack DIP Series B6 Suitable for Various Electrical Equipment Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the DC POWER JACK (DIP) product. It details electrical, mechanical, and durability performance characteristics, along with application notes for proper usage and handling.

Product Attributes

Customer Name:
Product Part Number: DC-511-2.5 D
Customer's Material Number: HY-WI-33
Date: 2024-06-24
Issue No: HYMD-Z201204Y
Manufacturer:
Series: B-6
Type: DC POWER JACK (DIP)

Technical Specifications

ITEM	TEST CONDITIONS	SPECIFICATIONS
1. RATING		DC12V 7A
2. OPERATING TEMPERATURE RANGE		-25~85
3. PRESERVATIVE TEMPERATURE RANGE		5~40
3. ELECTRICAL PERFORMANCE	3A CONTACT RESISTANCE	50m max (Measured at 0.1A DC5V, average of 5 successive measurements)
	3B INSULATION RESISTANCE	100M min (Applied 250V DC for 1 min between terminals and between terminals and frame)
	3C DIELECTRIC STRENGTH	No damage, arcing, or breakdown when 500V AC applied for 1 min between terminals and between terminals and frame.
4. MECHANICAL PERFORMANCE	4A INSERTION AND WITHDRAW FORCE	3N-40N
4. MECHANICAL PERFORMANCE	4B TERMINAL STRENGTH	No damage or excessive looseness when 10N static load applied to terminal tip for 60 sec in any direction. Electrical characteristics shall be satisfied.
5. DURABILITY	5A SOLDERABILITY TEST	Dipped 2mm in solder bath of 2455 for 5s+0/-0.5s. Solderability area should be over 95%.
	5B RESISTANCE TO SOLDERING HEAT TEST	Wave-soldering: 2605 for 30.5s. Hand welding: 3805 for 30.5s. No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
	5C LIFE TEST	5000 cycles at a speed of 30 cycles/min (no load). Contact resistance 200m. Mechanical and electrical characteristics shall be satisfied.
	5D HEAT TEST	852 for 96 hours. No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
	5E HUMIDITY TEST	402, 90-96%RH for 96 hours. No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
	5F COLD TEST	-402 for 48 hrs. No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
5G SALT SPRAY TEST	5% NaCl liquor for 24 hours. No excessive corrosion or crack in appearance (except riveting position).
APPLICATION NOTES	Solderability	Rosin and other insulating and caustic material cannot be dipped into the rocket during soldering.
	Cleaning	Products cannot be blown with air gun or cleaned with a solvent after soldering.
	Storage	Avoid storing products in a place at high temperature, high humidity and in corrosive gases. Shelf life is less than 180 days. Products need to be sealed preservation PE bag.
	Reporting	Report inferior goods for note, check, track, and improvement.