Tested RF Coaxial Connector MyAntenna A-IPEX1-1.25A Meeting Strict Electrical Mechanical Requirements
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product specification defines the product performance and the test methods to ascertain the performance of the RF coaxial connector, which is designed and manufactured by TREASURE ADVANCE ENTERPRISES LIMITED. This RF coaxial connector is designed to meet electrical, mechanical, and environmental performance requirements.
Product Attributes
- Brand: TREASURE ADVANCE ENTERPRISES LIMITED
- Certifications: UL498 (Standard for safety of attachment plug and receptacle)
- Harmful Material Control: Follows ROSH directive requirements.
- Marking: Manufacturers name, industry recognized logo, or customer approved marks. Green cresset is the mark of lead free processing.
Technical Specifications
| Item | Requirements | Test Methods |
| 1. Examination of Product | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| 2. Contact Resistance (Low Level) | 20 m Max. initial | Subject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max. |
| 3. Insulation Resistance | 500 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (100 V DC10%). |
| 4. Dielectric Strength | Connector must withstand test potential of 100 VAC for 1 minute.Current leakage must be 0.5 mA max.. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 301. |
| 5. Unmating Force | Total unmate force: Initial 5N min. after 30 cycles 3Nmin. | Unmate the receptacle at a speed 253mm/m by the push-on/pull-off machine |
| 6. Durability (Repeated Mating/Unmating) | Contact Resistance: 30m Max. after testing | Mate and unmate connector for 30 cycle. |
| 7. Crimp strength | 10N min | Pull the cable as shown at a speed 253mm/m by tensile strength machine. |
| 8. Vibration Sinusoidal Low Frequency | No electrical discontinuity greater then 1 sec (s) shall occur. Contact resistance:30 m max. | Subject mated connector to 10-55-10 Hz traversed in 1 minute at 1.5 mm amplitude 2 hours each of 3 mutually perpendicular plane, 10 mA applied MIL-STD-202, Method 201. |
| 9. Thermal shock | No damage, Contact Resistance (Low Level) (Final) 30 m max. | Temperature range from -55C to +85C .Start from -55C,after 30 min. change to +85C;change time is no more than 30 seconds. Total 5 cycles. MIL-STD-202, Method 107D,condition A. |
| 10. Humidity | No damage, Contact Resistance (Low Level) (Final) 30 m max.. Dielectric Strength should be OK, Insulation Resistance should be 200 M min. | Temperature :402C 96 hours. Relative Humidity : 90-95%; Duration :96 Hours. MIL-STD-202, Method 103. |
| 11. Salt Spray | Contact Resistance (Low Level) (Final)100 mmax. | 51% salt concentration 484 hours 352C MIL-STD-202, Method 101 Condition B. |
| 12. High temperature | Contact resistance: 100 mmax. | Subject product to 852C for 96 hours continuously. MIL-STD-202, Method 108. |
| 13. VSWR | 1.3max. at 0.1GHz~3GHz; 1.5max. at 3GHz~6GHz | Measure the VSWR as shown by the network,analyzerFrequency:100MHz~6GHz |
| Test Description | Test Sequence A | Test Sequence B | Test Sequence C | Test Sequence D | Test Sequence E | Test Sequence F | Test Sequence G | Test Sequence H | Test Sequence I | Test Sequence J | Test Sequence K |
| 1. Examination of Product | 1,3 | 1,3 | 1,5 | 1,5 | 1,5 | 1,5 | 1,9 | 1,9 | 1.4 | 1.7 | 1.3 |
| 2. Contact Resistance (Low Level) | 2 | 2,4 | 2,4 | 2,4 | 2.4 | 2.8 | 2.8 | 2.5 | 2.5 | ||
| 3. Insulation Resistance | 3,6 | 3,6 | 3,6 | ||||||||
| 4. Dielectric Strength | 4,7 | 4,7 | |||||||||
| 5. Unmating Force | 2 | ||||||||||
| 6. Durability | 3 | ||||||||||
| 7. Crimp strength | 3 | 2 | |||||||||
| 8. Vibration Sinusoidal Low Frequency | 3 | ||||||||||
| 9. Thermal shock | 3 | 5 | |||||||||
| 10. Humidity | 5 | ||||||||||
| 11. Salt Spray | 3 | ||||||||||
| 12. High temperature | 4 | ||||||||||
| 13. VSWR |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina