High Strength NETWORK CONNECTOR RCH RC00148 with Recycled PA46 Housing and Phosphor Copper Round Pins
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification applies to NETWORK CONNECTORS used in electronic products. These connectors are designed for reliable electrical connections, featuring robust construction and adherence to stringent performance standards for electrical efficiency, mechanical strength, and environmental resistance.
Product Attributes
- Brand: Wenzhou Ruichuan Electronics Co., Ltd.
- Product Series: RJ45/RJ11 Connector Series
- Model Type: NETWORK CONNECTOR
- Version: AO
- Material (Housing): PA46 (Black)
- Material (Pin): Phosphor Copper
Technical Specifications
| Category | Parameter | Requirement Value | Manufacturer Specification Value | Manufacturer Test Value | Judgment Standard |
|---|---|---|---|---|---|
| Basic Specification | Hole Count | 1 | 1 | ||
| Angle | 90 | 90 | |||
| Material | Housing | PA46 (Black), Recycled Material 15% | PA46 (Black), Recycled Material 15% | ||
| Round Pin | Phosphor Copper =0.46mm (Au=FU"), Salt Spray 8H | Phosphor Copper =0.46mm (Au=FU"), Salt Spray 8H | |||
| Back Cover | PA46 (Black), Recycled Material 15% | PA46 (Black), Recycled Material 15% | |||
| Key Dimensions | Dimension 1 | 58.2 0.25mm | 58.2 0.25mm | 58.25 | |
| Dimension 2 | 53.34 0.25mm | 53.34 0.25mm | 53.3 | ||
| Dimension 3 | 11.7 0.15mm | 11.7 0.15mm | 11.72 | ||
| Dimension 4 | 17.75 0.15mm | 17.75 0.15mm | 17.76 | ||
| Dimension 5 | 3.3 0.25mm | 3.3 0.25mm | 3.35 | ||
| Common Dimensions | Dimension 6 | 8.89 0.15mm | 8.89 0.15mm | 8.89 | |
| Dimension 7 | 2.54 0.15mm | 2.54 0.15mm | 2.54 | ||
| Dimension 8 | 7.65 0.15mm | 7.65 0.15mm | 7.67 | ||
| Dimension 9 | 2.9 0.1mm | 2.9 0.1mm | 2.95 | ||
| Dimension 10 | 1.65 0.1mm | 1.65 0.1mm | 1.66 | ||
| Electrical Performance | Rated Voltage | 125V | 125V | Normal operation at 125V, no obvious temperature rise. | |
| Rated Current | 1.5A | 1.5A | Normal operation at 1.5A, no obvious temperature rise. | ||
| Contact Resistance | < 0.03 | < 0.03 | Maximum 0.03. | ||
| Insulation Resistance | > 100 M (DC500V, 1min) | > 100 M (DC500V, 1min) | Minimum 100M. | ||
| Withstand Voltage | AC500V (1min) | AC500V (1min) | No dielectric breakdown. | ||
| Reliability | Insertion Force | 330N | 330N | Product Average: 12.5N | Judgment Standard: 330N. (Frequency: 12.5mm/min, uniform speed, with matching plug) |
| Extraction Force | 330N | 330N | Product Average: 10.2N | Judgment Standard: 330N. (Frequency: 12.5mm/min, uniform speed, with matching plug) | |
| Plug/Unplug Life | 750 cycles | 750 cycles | Conditions: No load, 8-10 cycles/min. 1. Insertion/Extraction Force: 3~30N. 2. Contact Resistance: < 0.03. | ||
| Heat Resistance | Test after 48 hours at 852 environment, then 30 min in normal environment. | Test after 48 hours at 852 environment, then 30 min in normal environment. | 1. Contact Resistance: < 0.03. 2. Insulation Resistance: > 100 M. 3. No signs of mechanical or electrical damage. | ||
| Solder Heat Resistance | 230, 5S | 230, 5S | 1. Plastic housing should not deform, terminals should not detach after test. 2. Mechanical and electrical characteristics should be met. | ||
| Salt Mist | 8 hours (35, 5%, PH6.57.2) | 8 hours (35, 5%, PH6.57.2) | 1. No obvious signs of rust on appearance. | ||
| Operating Temperature | -4070 | -4070 | 1. No obvious damage to the appearance of the socket within the specified temperature range. | ||
| Storage Temperature & Humidity | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | a. Temperature: -5~30; b. Relative Humidity: 20%~75% | 1. Contact Resistance: < 0.03. 2. Insulation Resistance: > 100 M. 3. No signs of mechanical or electrical damage. | ||
| Storage Period | 0.8 years | 0.8 years | Store under conditions of cleanliness, ventilation, no corrosive gases, away from partitions, and off the ground. | ||
| General Specification (from other section) | Current Rating | 1.5A DC / Contact, 20mA DC for LED signals | |||
| Voltage Rating | 125V AC / Contact, 2.0 volts DC for LED signals | ||||
| Operating Environment (Standard) | -20+70 | ||||
| Operating Environment (Industrial) | -40+85 (According to customer request) | ||||
| Humidity (Operating) | 2070% | ||||
| Storage Environment Temperature | -40 to +85 | ||||
| Storage Environment Humidity | 20%70% | ||||
| Test Environment Temperature | +20+30 | ||||
| Test Environment Humidity | 25%65% | ||||
| Test Environment Atmospheric Pressure | 86-106KPA | ||||
| Electrical Efficiency | Withstand Voltage | 500V (AC 50/60Hz RMS) for 1 minute, Leakage current 0.5mA MAX. | No dielectric breakdown shall occur. | ||
| Insulation Resistance | 100 M MIN. (Using a 500 volts DC meter) | ||||
| Contact Resistance | 30 M MIN. (across a pair of mated contacts, 20mV, 100mA max) | ||||
| Mechanical Efficiency | Insertion Force | Below 20N | With the rate of 20-30 times/minute, averagely. | ||
| Extraction Force | Below 20N | With the rate of 20-30 times/minute, averagely. | |||
| Terminal Strength | Withstand a force of 1-4N for 10 seconds. | Without loosing and breakdown, deformation of terminal is accepted. | |||
| Durability | Lifetest | 750 cycles | Contact resistance: 30m MIN. (Rate: 20 to 30 cycles per minutes) | The jack will not be destroyed. | |
| Solderability | Resistance to soldering heat test | Temperature of solder: 2603. Dip time: 51 seconds. | Housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical and Mechanical efficiency. | ||
| Environment Test | Cold Test | Subjected to -252 for 96 hours, then conditioned at room ambient for 30 minutes. | |||
| Heat Test | Subjected to 702 for 96 hours, then conditioned at room ambient for 30 minutes. | ||||
| Humidity Test | Subjected to 402 and 90%-95% RH for 96 hours, then conditioned at room ambient for 30 minutes. | ||||
| Soldering Test | Resistance to soldering heat test | Temperature of solder: 2453. Time of dip: 30.5 seconds. Length of dip: 2.0 mm. | Areas of soldering shall be capable of 95% or more of dip terminal area. Appearance shall not be changed obviously. Contact resistance: 50m max. Withstand voltage: AC 500V. | ||
| Salt Mist Test | 8 hours | Appearance shall not be extremely rust. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina