Connector OUPIIN 2011-1X02G00SB 2011 Series Pin Header 2.54mm Pitch Single Double Triple Row
OUPIIN 2011 Series Pin Header
The OUPIIN 2011 Series Pin Header is a 2.54mm pitch connector available in single, double, and triple row configurations. It supports both straight and right-angle mounting with a solder-type termination. Designed for reliable electrical connections, this series is suitable for various electronic applications requiring robust and precise interconnects.
Product Attributes
- Brand: OUPIIN
- Product Name: 2011 Series Pin Header
- Pitch: 2.54mm
- Configuration: Single/Double/Triple Row
- Mounting Type: Straight/Right Angle
- Termination Type: Solder Type
- Certifications: RoHS
Technical Specifications
| Product Name | Part No. | Drawing No. | Rating Current | Rating Voltage | Storage Temperature | Operating Temperature |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)Sx-x | 2011D01042 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)RB | 2011D01003 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxGxx(T)LB | 2011D01105 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Single Row Straight/Right Angle Solder Type | 2011-1XxxG00RW-4-4-0.4B | 2011D01077 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)SB | 2011D01004 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Double Row Straight/Right Angle Solder Type | 2011-2XxxGxx(T)RB | 2011D01102 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)SB | 2011D01005 | 3A | 110V AC | 0~+40 | -40~+105 |
| 2011 Series Pin Header 2.54mm Triple Row Straight/Right Angle Solder Type | 2011-3XxxGxx(T)RB | 2011D01103 | 3A | 110V AC | 0~+40 | -40~+105 |
Performance and Test Description
Mechanical & Electrical Characteristic
The connector shall have the mechanical and electrical performance as described in drawing.
Solderability
Connectors meet solder-ability to EIA-364-52 and shall be free of contaminants. A minimum of 95% solder coverage is required after testing with a soldering time of 3 to 5 seconds at 2455.
Resistance to Solder Heat
Each solder cycle consists of three consecutive phases as shown in Table II.
Performance Requirements (Table I)
| Item | Requirements | Test Methods |
| Confirmation of Product | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| Contact Resistance | 20 m Max. | Subject mated contacts assembled in housing to open circuit of 100 mA max., 20 mV max. Per EIA-364-06 |
| Insulation Resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. (500V DC) Per EIA-364-21 |
| Dielectric Withstanding Voltage | After testing, there shall be no breakdown. | Connector must withstand test potential of 1000V AC for 1 minute. Per EIA-364-20 |
| Retention Force | 0.8 Kg/pin. Min | Apply axial pullout force at the speed rate of 25.4 mm/minute. Per EIA-364-29 |
| Solder ability | There shall have a solder coverage of 95% minimum. | Soldering time: 3 to 5 seconds. Temperature: 2455 Per EIA-364-52 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.