Network Connector RCH RC00130 Featuring 180 Degree Angle and Green Yellow LED for Electronic Devices

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to Network Connectors designed for electronic products. These connectors offer reliable electrical performance with specified voltage and current ratings, suitable for various electronic applications. They are constructed with durable materials and undergo rigorous testing to ensure performance and longevity.

Product Attributes

Brand: Wenzhou Ruichuan Electronics Co., Ltd.
Product Series: RJ45/RJ11 Connector Series
Model Type: NETWORK CONNECTOR
Version: AO
Plastic Seat Material: PA46 (Black), with recycled material 15%
Pin Material: Phosphor Copper (=0.46mm)
LED Color: Green-Yellow (Resin/FE)
Shield Shell Material: Brass (Nickel Plated 30-50", Salt Fog 24H)

Technical Specifications

Category	Parameter Name	Required Value	Manufacturer Specification Value	Manufacturer Test Value	Test Condition	Judgment Standard
Basic Specification	Hole Count	1	1	-	-	-
Basic Specification	Angle	180	180	-	-	-
Material	Plastic Seat	PA46 (Black) 15% recycled material	PA46 (Black) 15% recycled material	-	-	-
	Round Pin	Phosphor Copper =0.46mm (Au=FU") Salt Fog 8H	Phosphor Copper =0.46mm (Au=FU") Salt Fog 8H	-	-	-
	LED (Light)	Green-Yellow (Resin/FE) Salt Fog 8H	Green-Yellow (Resin/FE) Salt Fog 8H	-	-	-
	Shield Shell	Brass (Nickel Plated 30-50" Salt Fog 24H)	Brass (Nickel Plated 30-50" Salt Fog 24H)	-	-	-
Structural Dimensions	Key Dimension 1	16.650.15mm	16.650.15mm	16.61	-	-
	Key Dimension 2	15.90.15mm	15.90.15mm	15.91	-	-
	Key Dimension 3	11.430.15mm	11.430.15mm	11.34	-	-
	Key Dimension 4	16.450.15mm	16.450.15mm	16.45	-	-
	Key Dimension 5	3.60.25mm	3.60.25mm	3.25	-	-
	Normal Dimension 6	2.540.15mm	2.540.15mm	2.57	-	-
	Normal Dimension 7	8.890.15mm	8.890.15mm	8.87	-	-
	Normal Dimension 8	3.80.15mm	3.80.15mm	3.8	-	-
	Normal Dimension 9	4.060.15mm	4.060.15mm	4.05	-	-
	Normal Dimension 10	15.70.15mm	15.70.15mm	15.71	-	-
	Normal Dimension 11	2.00.1mm	2.00.1mm	2.01	-	-
Electrical Performance	Rated Voltage	125V	125V	-	Socket operates normally at rated voltage, no obvious temperature rise.	-
	Rated Current	1.5A	1.5A	-	Socket operates normally at rated current, no obvious temperature rise.	-
	Contact Resistance			-	Maximum 0.03	-
	Insulation Resistance	>100 M (DC500V, 1min)	>100 M (DC500V, 1min)	-	Minimum 100M	-
	Withstand Voltage	AC 500V (1min)	AC 500V (1min)	-	No dielectric breakdown.	-
Reliability	Insertion Force	330N	330N	Product Average: 12.5N	Frequency of 12.5mm/min, uniform speed, with matching plug.	Judgment Standard: 330N
	Extraction Force	330N	330N	Product Average: 10.2N	Frequency of 12.5mm/min, uniform speed, with matching plug.	Judgment Standard: 330N
	Plug-unplug Lifespan	750 cycles	750 cycles	-	Under no-load conditions, 8-10 times per minute.	1. Insertion and extraction force: 330N. 2. Contact resistance:
	Heat Resistance	Test after 48 hours in 852 environment, then 30 minutes in normal environment.	Test after 48 hours in 852 environment, then 30 minutes in normal environment.	-	-	1. Contact resistance 100M. 3. No signs of mechanical or electrical damage.
	Soldering Temperature Resistance	230, 5S	230, 5S	-	-	1. Plastic base should not deform, terminals should not detach after test. 2. Mechanical and electrical characteristics should be met.
	Salt Spray	8 hours (35, 5%, PH6.57.2)	8 hours (35, 5%, PH6.57.2)	-	-	1. No obvious signs of rust on appearance.
	Operating Temperature	-4070	-4070	-	-	1. No obvious damage to the appearance of the socket within the required temperature range.
	Storage Temperature and Humidity	a. Temperature: -5~30; b. Relative Humidity: 20%~75%	a. Temperature: -5~30; b. Relative Humidity: 20%~75%	-	-	1. Contact resistance 100M. 3. No signs of mechanical or electrical damage.
	Storage Period	0.8 years	0.8 years	-	Stored under clean, ventilated, non-corrosive gas, partition, off-ground conditions.	-
General Specification	Current Rating	1.5A DC / Contact, 20mA DC for LED signals	-	-	-	-
	Voltage Rating	125V AC / Contact, 2.0 volts DC for LED signals	-	-	-	-
	Operating Environment (Standard Temperature)	-20+70	-	-	-	-
Electrical Efficiency	Withstand Voltage	500V (AC 50/60Hz RMS) for one minute, Leakage current 0.5mA MAX.	-	-	Between mutually insulated pin contacts. No dielectric breakdown shall occur.	-
Electrical Efficiency	Insulation Resistance	100 M MIN.	-	-	Using a 500 volts DC insulation resistance meter between mutually insulated terminals or metallic parts.	-
Mechanical Efficiency	Insertion Force	Below 20N	-	-	Insertion and extraction with matching plug at a rate of 20-30 times/minute, averagely (remove lock part).	-
Mechanical Efficiency	Extraction Force	Below 20N	-	-	Insertion and extraction with matching plug at a rate of 20-30 times/minute, averagely (remove lock part).	-
Durability	Lifetest	750 cycles	-	-	750 cycles of insertion and extraction with mated plug, at a rate of 20 to 30 cycles per minutes.	Product will not be destroyed. Contact resistance: 30m MIN.
Solderability	Resistance to soldering heat test	Temperature of solder: 2603. Dip time: 51 seconds.	-	-	Terminals dipped in solder.	Jack's appearance: housing shall not be transmutation, contact shall not be pull out from housing. Shall comply with Electrical efficiency and Mechanical efficiency.
Environment Test	Cold Test	-252 for 96 hours, then 30 minutes in ambient conditions.	-	-	-	-
	Heat Test	702 for 96 hours, then 30 minutes in ambient conditions.	-	-	-	-
	Humidity Test	402 and 90%-95% RH for 96 hours, then 30 minutes in ambient conditions.	-	-	-	-
	Temperature Cycling Test	Conditions as shown below, then 30 minutes in ambient condition. Temperature of solder: 2453. Time of dip: 30.5 seconds. Length of dip: 2.0 mm.	-	-	-	-
Salt Mist Test	8 hours (352, 51% salt water concentration)	-	-	-	-	Appearance shall not be extremely rust.