Durable network connector RCH RC00107 with 10 millimeter key dimension and gold plated pin material

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to NETWORK CONNECTORS used in electronic products. These connectors are designed for electrical applications, offering reliable performance with specified electrical, mechanical, and durability characteristics. They are suitable for various electronic product applications.

Product Attributes

Brand: Wenzhou Ruichuan Electronics Co., Ltd.
Product Series: RJ45/RJ11 Connector Series
Model Type: NETWORK CONNECTOR
Version: AO
Plastic Seat Material: PBT (Black)
Pin Material: Phosphor Copper (=0.46mm, Au=FU")

Technical Specifications

Category	Parameter Name	Required Value	Manufacturer Specification Value	Manufacturer Test Value
Basic Specification	Hole Count	1	1
Basic Specification	Angle	180	180
Structural Dimensions	Key Dimension 1	13.60.15mm	13.60.15mm	13.59
	Key Dimension 2	16.60.15mm	16.60.15mm	16.53
	Key Dimension 3	10.000.15mm	10.000.15mm	9.96
	Key Dimension 4	2.80.1mm	2.80.1mm	2.79
	Key Dimension 5	15.90.5mm	15.90.5mm	15.89
	Key Dimension 6	15.750.15mm	15.750.15mm	15.68
	Key Dimension 7	3.650.25mm	3.650.25mm	3.68
	General Dimension 8	2.540.15mm	2.540.15mm	2.54
	General Dimension 9	8.890.15mm	8.890.15mm	8.87
	General Dimension 10	6.50.15mm	6.50.15mm	6.53
	General Dimension 11	3.00.1mm	3.00.1mm	3.05
	General Dimension 12	1.270.10mm	1.270.10mm	1.27
	General Dimension 13	6.350.15mm	6.350.15mm	6.35
Electrical Performance	Rated Voltage	125V	125V
	Rated Current	1.5A	1.5A
	Contact Resistance	<0.03	<0.03
	Insulation Resistance	>100 M (DC500V, 1min)	>100 M (DC500V, 1min)
	Withstand Voltage	AC500V (1min)	AC500V (1min)
Reliability	Insertion Force	330N	330N	12.5N (Average)
	Extraction Force	330N	330N	10.2N (Average)
	Insertion/Extraction Life	750 cycles (8-10 times/min, no load)	750 cycles (8-10 times/min, no load)
	Heat Resistance	Test after 48h at 852, then 30 min in normal environment	Test after 48h at 852, then 30 min in normal environment
	Solder Heat Resistance	230, 5S	230, 5S
	Salt Mist	8 hours (35, 5%, PH6.57.2)	8 hours (35, 5%, PH6.57.2)
	Operating Temperature	-4070	-4070
	Storage Temperature & Humidity	Temp: -5~30; RH: 20%~75%	Temp: -5~30; RH: 20%~75%
General Specification	Current Rating	1.5A DC / Contact, 20mA DC for LED signals
General Specification	Voltage Rating	125V AC / Contact, 2.0 volts DC for LED signals
Operating Environment	Standard Temperature	-20+70
	Industrial Temperature	-40+85 (According to customer request)
	Humidity	2070%
Storage Environment	Temperature	-40 to +85
Storage Environment	Humidity	20%70%
Electrical Efficiency	Withstand Voltage	500V (AC 50/60Hz RMS) for 1 minute, Leakage current 0.5mA MAX.
	Insulation Resistance	100 M MIN. (Using a 500 volts DC insulation resistance meter)
	Contact Resistance	30 M MIN. (measurement across a pair of mated contacts, 20mV, 100mA max)
Mechanical Efficiency	Insertion/Extraction Force	Insertion force below 20N, extraction force below 20N (rate of 20-30 times/minute)
Mechanical Efficiency	Terminal Strength	Withstand a force of 1-4N for 10 seconds.
Durability / Lifetest	750 cycles of insertion and extraction (rate of 20 to 30 cycles per minutes)		Contact resistance: 30m MIN.
Solderability / Resistance to soldering heat test	Temperature of solder	2603		Diptime: 51 seconds.
Solderability / Resistance to soldering heat test	Performance	Housing shall not be transmutation, contact shall not be pull out from housing. Comply with Electrical efficiency and Mechanical efficiency.
Environment Test	Cold Test	Subjected to -252 for 96 hours, then 30 minutes in room ambient.
	Heat Test	Subjected to 702 for 96 hours, then 30 minutes in room ambient.
	Humidity Test	Subjected to 402 and 90% to 95% RH for 96 hours, then 30 minutes in room ambient.
	Salt Mist Test	352, 5% salt water, 8 hours.		Appearance shall not be extremely rust.