flexible flat cable connector SHOU HAN FPC 0.5-10P HYH2.0 with rated voltage 50V and temperature range
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors by Shenzhen Shouhan Technology Co., Ltd. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: Shenzhen Shouhan Technology Co., Ltd. (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: China
- Product Name: FFC/FPC Flat Cable Connector
- Part Number: FPC 0.5-10P HYH2.0
- Material Code: Not specified
Technical Specifications
| Category | Item | Specification/Requirement | Test Condition |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | ||
| Ambient Temperature Range | -25+85 | ||
| Electrical Performance | Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | |
| Dielectric Strength | No Breakdown | Apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | Mate applicable FPC/FFC |
| Mechanical Performance | Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at the speed rate of 253mm/minute. | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. | |
| Environmental and Other Performance | Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). | |
| Vibration | Contact Resistance 60 m MAX; Discontinuity 1 ms MAX; Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X, Y, Z axes (DC 1mA applied). | |
| Shock | Appearance: No Damage; Discontinuity 1 ms MAX | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA applied). | |
| Heat Resistance | Appearance: No Damage; Contact Resistance 60 m MAX | 852, 96 hours, then return to room temperature for 1-2 hours. | Mate applicable FPC/FFC |
| Cold Resistance | Appearance: No Damage; Contact Resistance 60 m MAX | -402, 96 hours, then return to room temperature for 1-2 hours. | Mate applicable FPC/FFC |
| Humidity | Appearance: No Damage; Contact Resistance 60 m MAX; Dielectric Strength: Must meet 4.1.3; Insulation Resistance 20 M MIN | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours, then measure within 0.5 hours at room temperature. | Mate applicable FPC/FFC |
| Temperature Cycling | Appearance: No Damage; Contact Resistance 60 m MAX | 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature between cycles. | Mate applicable FPC/FFC |
| Salt Spray | Appearance: No Damage, No Corrosion; Contact Resistance 60 m MAX | 48 4 hours exposure to a salt spray from a 51% solution at 352. Followed by washing with room temperature water and drying. | Mate applicable FPC/FFC |
| SO2 Gas Resistance | Contact Resistance 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. | Mate applicable FPC/FFC |
| NH3 Gas Resistance | Appearance: No Damage; Contact Resistance 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Mate applicable FPC/FFC |
| Solderability | Solder Wetting | 95% wetting area | Soldering Time: 20.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec; Soldering Temperature: 2455 in a hot air oven, performed at least 5 times. | |
| Product Shape, Dimensions and Materials | Main body | LCP UL 94V-0 | Refer to drawing |
| Housing Lock | LCP UL 94V-0 | Refer to drawing | |
| Terminal/Contact | Phosphor Bronze | Refer to drawing | |
| Solder tab | Phosphor Bronze | Refer to drawing | |
| Remark | Metal surface plated with tin |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina