0.5mm Pitch FFC FPC Connector SHOU HAN FPC 0.5-30P HYH2.0 Designed for Harsh Environmental Conditions
Product Overview
The SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD FFC/FPC Connector is a 0.5mm pitch flexible flat cable connector designed for reliable electrical connections. It is suitable for a wide range of operating temperatures and offers robust performance in terms of contact resistance, insulation resistance, and dielectric strength. The connector is engineered for mechanical durability, featuring specified locking and withdrawal forces, as well as terminal retention force. It has undergone rigorous testing for environmental performance, including repeated insertion/withdrawal, temperature rise, vibration, shock, heat resistance, cold resistance, humidity, temperature cycling, salt spray, SO2 gas, and NH3 gas resistance, ensuring consistent performance and durability in various conditions. Its solderability and resistance to soldering heat are also key performance indicators.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Product Type: FFC/FPC Flat Cable Connector
- Pitch: 0.5mm
- Housing Lock Material: LCP UL 94V-0
- Main Body Material: LCP UL 94V-0
- Terminal/Contact Material: Phosphor Bronze
- Terminal Surface Treatment: Tin Plated
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V (AC/DC, virtual value 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force (n=number of positions) | Locking: 1.96*n N MAX Withdrawal: 0.49*n N MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute, without power. |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX | DC 1mA under power. Vibration along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours in each axis. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX | DC 1mA under power. 490m/s{50G}, 3 strokes in each of X, Y, Z axes. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC, place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Mate applicable FPC/FFC, place in 402, 90-95% RH air for 96 hours, then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes, b) 852 for 30 minutes, with 10-15 minutes at room temperature and humidity between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from a 51% solution at 352. After test, wash with room temperature water and dry at room temperature. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% coverage | Immerse terminal tip at 0.2mm from the reference plane into a 2455 tin bath for 20.5 sec. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Exposed to 2455 hot air for 305 sec, at least 5 times. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.