0.5mm Pitch Flexible Flat Cable Connector SHOU HAN FPC 0.5-18P LTH2.0 for Electronics and Electrical
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch FPC/FFC Connectors, designed for flexible flat cable connections. These connectors are suitable for applications requiring reliable electrical and mechanical performance under various environmental conditions.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO., LTD
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Material Code: LTH2.0
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V (AC/DC, Virtual value 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. 'n' refers to the number of positions. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. 'n' refers to the number of positions. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at a speed of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. Appearance: No Damage. | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes (DC 1mA applied). |
| Shock | Appearance: No Damage; Discontinuity: 1 ms MAX. | 490m/s {50G}, 3 strokes in each X, Y, Z axes (DC 1mA applied). |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage; Contact Resistance: 60 m MAX; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN. | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. Measured within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at normal temperature and humidity between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion; Contact Resistance: 60 m MAX | 48 4 hours exposure to a 51% salt spray solution at 352. After testing, wash with room temperature water and dry. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting: 95% of wetted area. | Soldering Time: 20.5 sec; Soldering Temperature: 2455; at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation. | Soldering Time: 305 sec; Soldering Temperature: 2455; performed at least 5 times. |
| Product Shape, Dimensions, and Materials | ||
| Main Body | LCP (UL 94V-0) | Refer to drawing. |
| Housing Lock | LCP (UL 94V-0) | Refer to drawing. |
| Terminal | Phosphor Bronze | Refer to drawing. Metal surface plated with tin. |
| Contact | Phosphor Bronze | Refer to drawing. Metal surface plated with tin. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina