Durable type C interface connector SHOU HAN TYPE-C 16P DG2.5 with 16 pin DG2.5 specification

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the TYPE-C 16P DG2.5 connector, manufactured by Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance under various environmental conditions. The connector is suitable for applications requiring a Type-C interface with 16 pins and a DG2.5 specification.

Product Attributes

Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Origin: Shenzhen, China
Product Name: TYPE-C
Model/Part Number: TYPE-C 16P DG2.5
Material Code: TYPE-C 16P DG2.5

Technical Specifications

Category	Item	Test Conditions	Performance/Specification
RATING	Voltage	N/A	20V
RATING	Current	N/A	5A
ENVIRONMENTAL	Practical Temperature Range	N/A	-30C ~ 80C
ENVIRONMENTAL	Standard Atmospheric Conditions (Measurement)	N/A	Temperature: 5C to 35C Humidity: 45% to 85% Pressure: 86Kpa to 106Kpa
MECHANICAL	Connection Force	After connecting and disconnecting using standard plug gauge 3 times	0.5 ~ 2.0 Kgf
MECHANICAL	Disconnection Force	After connecting and disconnecting using standard plug gauge 3 times	0.8 ~ 2.0 Kgf
MECHANICAL	Terminal Strength	Static load of 0.1N/m (1kgf/cm) applied to terminal tip for 1 min in any direction	No damage to terminal (cracks, looseness, play); electrical and mechanical characteristics satisfied.
ELECTRICAL	Contact Resistance	Measured at small current (100mA or less), 1000Hz	40m MAX
	Insulation Resistance	Apply 100V DC for 1 min between specified portions	100M MIN
	Dielectric Strength	AC 100V rms (50~60Hz) for 1 min, trip current: 0.5mA, between specified portions	No damage, arcing, or breakdown
DURABILITY	Solderability Test	Terminal top dipped 1mm in solder bath at 2505 for 50.5 seconds	Solder wetting time: 3 sec; Soldering area: > 75%
DURABILITY	Resistance to Soldering Heat Test (Reflow)	Preheat: 180 for 120s; Peak temp: 2605 within 20s	No deformation of case or excessive looseness of terminals; electrical characteristics satisfied.
DURABILITY	Resistance to Soldering Heat Test (Soldering Iron)	Bit temp: 3305, application time: 30.5 sec (no excessive pressure)	No deformation of case or excessive looseness of terminals; electrical characteristics satisfied.
DURABILITY	Humidity Test	Stored at 402 and 90%-96% humidity for 96 Hr, then 1 Hr at standard atmospheric conditions	No damage on appearance; mechanical and electrical characteristics satisfied.
DURABILITY	Heat Test	Stored at 702 for 96 hours, then recovered at room temperature for 1 hour	No damage on appearance; mechanical and electrical characteristics satisfied.
DURABILITY	Cold Test	Stored at -253 for 96 hours, then recovered at room temperature for 1 hour	No damage on appearance; mechanical and electrical characteristics satisfied.
DURABILITY	Life Test	(1) Without Load: 10000 cycles at 10-25 cycles/min	Contact Resistance: 0.1
		(2) Load: At rating condition (non-inductive load): 10000 cycles at 10-20 cycles/min	Disconnection Force: 0.8 to 2.0N
				Other: Mechanical and electrical characteristics satisfied.
ENVIRONMENTAL	Temperature Cycling Test	5 cycles of specified temperature profile (80C to -40C)	No deformation or cracks in molded part.
			Insertion & Extraction Force: 3 to 20N
			Contact Resistance: Max. 30m
			Insulation Resistance: Min. 100 M Dielectric Withstanding Voltage: 100VAC/min (between terminals)
ENVIRONMENTAL	Cold & Heat Shock Test	5 cycles of specified temperature profile (70C to -20C)	No deformation or cracks in molded part.
			Insertion & Extraction Force: 3 to 25N
			Contact Resistance: Max. 30m
			Insulation Resistance: Min. 100 M Dielectric Withstanding Voltage: 500VAC/min (between terminals)