Durable SHOU HAN TYPE-C 24P-GTJB 040 connector featuring mechanical strength and Type-C connectivity

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification sheet details the TYPE-C 24P-GTJB 040 connector from Shenzhen Shouhan Technology Co., Ltd. It outlines the product's technical specifications, including electrical, mechanical, and durability performance, designed for various applications requiring reliable Type-C connectivity.

Product Attributes

Brand: (Shenzhen Shouhan Technology Co., Ltd.)
Model: TYPE-C 24P-GTJB 040
Origin: China

Technical Specifications

Category	Item	Test Conditions	Performance (Specification)
RATING	PRACTICAL TEMPERATURE RANGE	-30~80C	Within -30~80C
RATING	RATING	DC 20V 3A
MECHANICAL	CONNECTION FORCE	Measurement after connecting and disconnecting using standard plug gauge 3 times.	5-20N
MECHANICAL	DISCONNECTION FORCE	Measurement after connecting and disconnecting using standard plug gauge 3 times.	8~20N
MECHANICAL	TERMINAL STRENGTH	A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction.	No damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied.
ELECTRICAL	CONTACT RESISTANCE	Measured at small current (100mA or less) 1000Hz	40m MAX
	INSULATION RESISTANCE	Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted	100M MIN
	DIELECTRIC STRENGTH	AC 100V rms (50~60Hz) for 1 min, Trip Current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted	Without damage to parts, arcing or breakdown etc.
DURABILITY	SOLDERA-BILITY TEST	The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds.	(1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%.
DURABILITY	RESISTANCE TO SOLDERING HEAT TEST (REFLOW)	Preheat: 180.120s. Tallest Temperature: 2605 within 20 seconds.	Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
DURABILITY	RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON)	Bit temperature 3305, application time 30.5 seconds. However, excessive pressure shall not be applied to the terminal.	Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
DURABILITY	HUMIDITY TEST	Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr.
DURABILITY	HEAT TEST	Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
DURABILITY	COLD TEST	Stored at -253 for 96 hours, then subjected to controlled recovery conditions for 1 Hr.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
DURABILITY	LIFE TEST (WITHOUT LOAD)	Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min.
DURABILITY	LIFE TEST (WITH LOAD)	At rating condition (non-inductive load), connection and disconnection for 5000 cycles at a speed of 10 to 20 cycles/min.	(1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Other: Mechanical and electrical characteristics shall be satisfied.
DURABILITY	TEMPERATURE CYCLING TEST	5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals).
DURABILITY	COLD & HEAT SHOCK TEST	5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals).