SHOU HAN TYPE-C 6P CB1.6 073 connector featuring low contact resistance and strong connection force

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the TYPE-C 6P CB1.6(073) connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range.

Product Attributes

Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Model: TYPE-C 6P CB1.6(073)
Origin: Shenzhen, China
Rating: DC5V 3A
Operating Temperature Range: -30~80C

Technical Specifications

Item	Project	Test Conditions	Performance/Specification
Mechanical	Connection Force	Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times.	0.5-2.0Kgf
Mechanical	Disconnection Force	Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times.	0.8~2.0Kgf
Electrical	Contact Resistance	Measured at small current (100mA or less) 1000Hz	50m MAX
Electrical	Insulation Resistance	Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted	100M MIN
Electrical	Dielectric Strength	AC 100V rms(50~60Hz) for 1 min, Trip current: 0.5mA. Tested between: (1) Body and conductor (2) Conductors not to be contact (3) Conductors not to be when plug is inserted	Without damage to parts, arcing or breakdown etc.
Durability	Solderability Test	The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds.	(1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%.
Durability	Resistance to Soldering Heat Test (Reflow)	Preheat: 180, 120s. Peak temperature: 2605 within 20 seconds.	Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
Durability	Resistance to Soldering Heat Test (Soldering Iron)	Bit temperature 3305, application time 30.5 seconds. No excessive pressure on terminal.	Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
Durability	Humidity Test	Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr.	Appearance no abnormality. Mechanical and electrical characteristics shall be satisfied.
Durability	Heat Test	Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr.	Appearance no abnormality. Mechanical and electrical characteristics shall be satisfied.
Durability	Cold Test	Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr.	Appearance no abnormality. Mechanical and electrical characteristics shall be satisfied.
Durability	Life Test (Without Load)	Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min.	-
Durability	Life Test (With Load)	At rating condition (non-inductive load), connection and disconnection for 5000 cycles at a speed of 10 to 20 cycles/min.	(1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied.
Durability	Temperature Cycling Test	5 cycles of specified temperature conditions, then allowed to remain in room ambient condition for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals).
Durability	Cold & Heat Shock Test	5 cycles of specified temperature conditions, then allowed to remain in room ambient condition for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals).