Compact SHOU HAN TYPE-C 16P CB0.8 073 connector rated DC5V 3A designed for electrical connections

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the TYPE-C 16P CB0.8 073 connector from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range.

Product Attributes

Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Origin: Shenzhen, China
Product Name: TYPE-C 16P CB0.8 073
Material Code: RATING DC5V 3A

Technical Specifications

Item	Test Conditions	Performance	Specification
RATING
			DC5V 3A
PRACTICAL TEMPERATURE RANGE
			-25~85C
STANDARD ATMOSPHEIC CONDITIONS
	(1) Temperature		5C TO 35
	(2) Humidity		45% TO 85%
	(3) Pressure		86Kpa TO 106Kpa
MECHANICAL
1. CONNECTION FORCE	After connecting and disconnecting using standard plug gauge 3 times.		0.5-1.5Kgf
2. DISCONNECTION FORCE	After connecting and disconnecting using standard plug gauge 3 times.		0.8-1.5Kgf
3. TERMINAL STRENGTH	A static load of 0.1N/m(1kgf/cm) applied to the tip of the terminal for 1 min in any direction. No damage such as cracks, looseness or play.		Satisfied mechanical and electrical characteristics.
ELECTRICAL
3.1 CONTACT RESISTANCE	Measured at small current (100mA or less) at 1000Hz.		40m MAX
3.2 INSULATION RESISTANCE	Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted.		100M MIN
3.3 DIELECTRIC STRENGTH	AC 100V rms(50~60Hz) for 1 min, trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted.		Without damage to parts, arcing or breakdown etc.
DURABILITY
4.1 SOLDERABILITY TEST	The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds.	(1) Solder wetting time	3 SEC
		(2) The area of soldering	> 75%
4.2 RESISTANCE TO SOLDERING HEAT TEST (REFLOW SOLDERING)	Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds.		Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
4.2 RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON METHOD)	Bit temperature 3305, application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal.		Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
4.3 HUMIDITY TEST	Stored at a temperature of 402 and a humidity of 90%to 96% for 96 Hr, then maintained at standard atmospheric condition for 1 Hr.		Appearance no abnormal. Mechanical and electrical characteristics shall be satisfied.
4.4 HEAT TEST	Stored at a temperature of 702 for 96 hours, then subjected to controlled recovery for 1 Hr.		Appearance no abnormal. Mechanical and electrical characteristics shall be satisfied.
4.5 COLD TEST	Stored at a temperature of -253 for 96 hours, then subjected to controlled recovery for 1 Hr.		Appearance no abnormal. Mechanical and electrical characteristics shall be satisfied.
4.6 LIFE TEST (WITHOUT LOAD)	Connection and disconnection made with mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min.		Satisfied mechanical and electrical characteristics.
4.6 LIFE TEST (LOAD)	At rating condition (non-inductive load), connection and disconnection made for 5000 cycles at a speed of 10 to 20 cycles/min.	(1) Contact resistance	0.1
		(2) Disconnection force	0.8 TO 2.0N
		(3) Other	Satisfied mechanical and electrical characteristics.
4.7 TEMPERATURE CYCLING TEST	Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes.	Insertion & Extraction Force:	3 TO 20N
		Contact Resistance:	MAX.30M
		Insulation Resistance:	MIN.100 M
		Dielectric Withstanding Voltage:	100VAC/MIN (Between Terminals)
			Product cannot deform or crack.
4.8 COLD & HEAT SHOCK TEST	Subjected to 5 cycles of specified conditions, then returned to room ambient for 30 minutes.	Insertion & Extraction Force:	3 TO 25N
		Contact Resistance:	MAX.30M
		Insulation Resistance:	MIN.100 M
		Dielectric Withstanding Voltage:	500VAC/MIN (Between Terminals)
			Product cannot deform or crack.