Durable USB connector SHOU HAN AF 180°ZJZB13.0 with max connection force 3.57Kgf and electrical rating DC 30V 1.5A
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification outlines the requirements for the USB AF 180ZJZB13.0, a product from Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for operation within a specific temperature range and under standard atmospheric conditions.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO., LTD)
- Origin: China
- Model: AF 180ZJZB13.0
- Part No: AF 180ZJZB13.0
- Material Code: USB
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| RATING | |||
| Rated Value | DC 30V 1.5A | ||
| PRACTICAL TEMPERATURE RANGE | |||
| Usage Temperature Range | -25~85C | ||
| STANDARD ATMOSPHEIC CONDITIONS | |||
| (1) Temperature | 5 TO 35 | ||
| (2) Humidity | 45% TO 85% | ||
| (3) Pressure | 86Kpa TO 106Kpa | ||
| MECHANICAL | |||
| CONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | Measurement | 3.57Kgf MAX |
| DISCONNECTION FORCE | After connecting and disconnecting using standard plug gauge 3 times. | Measurement | 0.7Kgf MIN |
| TERMINAL STRENGTH | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | Performance | No cracks, looseness, or abnormal play in terminals. Satisfies mechanical and electrical characteristics. |
| ELECTRICAL | |||
| CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz | Measurement | 30m MAX |
| INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Measurement | 1000M MIN |
| DIELECTRIC STRENGTH | AC 500V rms(50~60Hz) for 1 min Trip Current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Measurement | No damage to parts, arcing, or breakdown etc. |
| DURABILITY | |||
| SOLDERABILITY TEST | (1) The top of the terminals shall be dipped 1mm in the solder bath of 2305 for 30.5 seconds. (2) The area of soldering should be over 75%. | Performance | Solder wetting time shall be 3 seconds or less. |
| RESISTANCE TO SOLDERING HEAT TEST | Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. | Performance | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| HUMIDITY TEST | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | ||
| HEAT TEST | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to controlled recovery. | Performance | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| COLD TEST | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to controlled recovery conditions for 1 hour after which. | Performance | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| LIFE TEST | Connection and disconnection shall be made 5000 cycles at a speed of 10 to 20 cycles/min (without load). Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min (at rating condition, non-inductive load). | Performance | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.7 to 2.0Kgf (3) Other: Satisfies mechanical and electrical characteristics. |
| TEMPERATURE CYCLING TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Temp(): 70 (8 hours), 0 (0.5 hours) -20 (1 cycle) | Performance | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| COLD & HEAT SHOCK TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Temp(): 70 (0.5 hours), -20 (0.5 hours), 1 cycle | Performance | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina