Stable electrical SHOU HAN TYPE-C 6P connector rated 5V 3A with tested mechanical and terminal strength

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification sheet details the TYPE-C 6P connector from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It outlines the product's electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range.

Product Attributes

Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO., LTD)
Origin: (Shenzhen)
Product Name: TYPE-C 6P

Technical Specifications

Category	Item	Test Conditions	Performance Specification
RATING	(Rating)		5 V 3 A
RATING	(Practical Temperature Range)		-30 C~85C
MECHANICAL	CONNECTION FORCE ()	After connecting and disconnecting using standard plug gauge 3 times.	5~20N
MECHANICAL	DISCONNECTION FORCE ()	After connecting and disconnecting using standard plug gauge 3 times.	6~20N
TERMINAL STRENGTH		A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction.	No damage such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied.
ELECTRICAL	CONTACT RESISTANCE ()	Measured at small current (100mA or less) at 1000Hz.	40m MAX
	INSULATION RESISTANCE ()	Apply a voltage of 100V DC for 1 min to specified portions.	100M MIN
	DIELECTRIC STRENGTH ()	AC 100V (rms, 50~60Hz) for 1 min, trip current: 0.5mA. Applied to specified portions.	Without damage, arcing or breakdown etc.
DURABILITY	SOLDERA-BILITY TEST ()	Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds.	(1) Solder wetting time: 3 sec. (2) Soldering area: > 75%.
	RESISTANCE TO SOLDERING HEAT TEST () - Reflow	Reflow soldering conditions: Preheat to 180 for 120s. Peak temperature 2605 within 20 seconds.	No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
	RESISTANCE TO SOLDERING HEAT TEST () - Soldering Iron	Bit temperature 3305, application time 30.5 sec. No excessive pressure.	No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
	HUMIDITY TEST ()	Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
	HEAT TEST ()	Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
COLD TEST ()	Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
LIFE TEST ()	Without Load: 3000 cycles at 10 to 25 cycles/min.	(1) Contact resistance: 0.1. (2) Disconnection force: 0.8 to 2.0N. (3) Mechanical and electrical characteristics shall be satisfied.
LIFE TEST ()	With Load (Rating condition, non-inductive): 3000 cycles at 10 to 20 cycles/min.	(1) Contact resistance: 0.1. (2) Disconnection force: 0.8 to 2.0N. (3) Mechanical and electrical characteristics shall be satisfied.
TEMPARATURE CYCLING TEST ()	5 cycles of specified temperature profile (-20 to 80), followed by 30 minutes in room ambient.	No deformation or cracks. Insertion/Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals).
COLD&HEAT SHOCK TEST ()	5 cycles of specified temperature profile (-20 to 70), followed by 30 minutes in room ambient.	No deformation or cracks. Insertion/Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals).