SHOU HAN 10.0 QHHTZB6.3 connector providing high terminal strength and contact resistance for professional
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification document outlines the technical details and performance standards for a connector product from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It details the product's practical temperature range, standard atmospheric conditions for testing, and various performance metrics including connection/disconnection force, terminal strength, contact resistance, insulation resistance, dielectric strength, and durability under various environmental and operational stresses. The product is designed for applications requiring reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: SHOUHAN
- Origin: Shenzhen, China
- Model (Customer): QHHTZB6.3
- Model (Manufacturer): 10.06.3
- Rating: DC 30V 1.5A
Technical Specifications
| Item | Test Conditions | Performance | |||
| 1 | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | 3.57Kgf | |
| 2 | Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | PLUG GAUGE 3 | 1.02Kgf | |
| 3 | Terminal Strength | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | 1 0.1N/m(1kgf/cm). | ||
| 3.1 | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 100 m A | 30m | |
| 3.2 | Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100V DC 1 1 2 3 | 1000M | |
| 3.3 | Dielectric Strength | AC 500V rms(50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | AC 500V 50Hz/min 1 0.5mA, : (1) (2) (3) | Without damage to parts arcing or breakdown etc. | |
| 4.1 | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | 1mm ,2505, 50.5 13 275% | ||
| 4.2 | Resistance to Soldering Heat Test (Reflow) | Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. | :180. :260520 | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.2 | Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305. Application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. | 3305 30.5 | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| 4.3 | Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | 402 90~96% Hr 96 1 | ||
| 4.4 | Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, then subjected to controlled recovery for 1 hour. | 70296 1 | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.5 | Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then subjected to controlled recovery for 1 hour. | -25396 1 | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.6 | Life Test (Without Load) | Connection and disconnection shall be made with mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | Plug() 1 10~25 5000 | ||
| 4.6 | Life Test (Load) | At rating condition (non-inductive load). Connection and disconnection shall be made 5,000 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 7N (3) Mechanical and electrical characteristics shall be satisfied. | ()1 10~20 5000 (1) 0.1 (2) 7N (3) :, | ||
| 4.7 | Temperature Cycling Test | The jack shall be subjected to 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | 5 30 . . 3N 20N. 30m. 100 M. 100VAC. | ||
| 4.8 | Cold & Heat Shock Test | The jack shall be subjected to 5 cycles of specified conditions, then allowed to remain in room ambient condition for 30 minutes. There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | 5 30 . . 3N 25N. 30m. 100 M. 500VAC. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina