Durable SHOU HAN TYPE-C 16PFS 2JCB0.8-H7.45 IPX8 Connector with Connection Force and Waterproof Rating
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This document outlines the specifications for the TYPE-C 16PFS 2JCB0.8-H7.45 IPX8 connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for operation within a temperature range of -30~80C.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Origin: Shenzhen, China
- Model: TYPE-C 16PFS 2JCB0.8-H7.45 IPX8
- Waterproof Rating: IPX8
- Voltage Rating: DC20V
- Operating Temperature Range: -30~80C
Technical Specifications
| Item | Test Conditions | Performance Specification |
| MECHANICAL () | ||
| CONNECTION FORCE () | Measured after connecting and disconnecting using standard plug gauge 3 times. | 0.5-2.0Kgf |
| DISCONNECTION FORCE () | Measured after connecting and disconnecting using standard plug gauge 3 times. | 0.8-2.0Kgf |
| TERMINAL STRENGTH () | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | - |
| ELECTRICAL () | ||
| CONTACT RESISTANCE () | Measured at small current (100mA or less) 1000Hz. | 40m MAX |
| INSULATION RESISTANCE () | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | 100M MIN |
| DIELECTRIC STRENGTH () | AC 100V rms(50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | Without damage to parts, arcing or breakdown etc. |
| DURABILITY () | ||
| SOLDERABILITY TEST () | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. | - |
| RESISTANCE TO SOLDERING HEAT TEST () | Reflow soldering conditions: Preheat: 180, 120s. Tallest temperature: 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Soldering iron method: Bit temperature 3305. Application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| HUMIDITY TEST () | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | - |
| HEAT TEST () | The jack shall be stored at a temperature of 702 for 96 hours, then subjected to controlled recovery for 1 Hr. | Appearance shall be normal. Mechanical and electrical characteristics shall be satisfied. |
| COLD TEST () | The jack shall be stored at a temperature of -253 for 96 hours, then subjected to controlled recovery for 1 Hr. | Appearance shall be normal. Mechanical and electrical characteristics shall be satisfied. |
| LIFE TEST () | Without load: Connection and disconnection for 10000 cycles at a speed of 10 to 25 cycles/min. | - |
| With load: At rating condition (non-inductive load). Connection and disconnection for 10000 cycles at a speed of 10 to 20 cycles/min. (1) Contact resistance shall be 0.1. (2) Disconnection force shall be 0.8 to 2.0N. (3) Mechanical and electrical characteristics shall be satisfied. | - | |
| TEMPERATURE CYCLING TEST () | Subjected to 5 cycles of specified conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| COLD & HEAT SHOCK TEST () | Subjected to 5 cycles of specified conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina