Tested SHOU HAN USB-PG 10PIN 040 connector ensures no cracks looseness or play under mechanical stress
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification sheet details the SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD USB-PG10PIN 040, a component designed for use within a temperature range of -25~85C under standard atmospheric conditions. It is rated for DC 30V 1.5A and undergoes rigorous testing to ensure mechanical, electrical, and durability performance.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: Shenzhen, China
- Part Number: USB-PG10PIN 040
Technical Specifications
| Item | Test Conditions | Performance | Specification | |
| Mechanical | Connection Force (after 3 cycles with standard plug gauge) | Measurement | 15N MAX | |
| Disconnection Force (after 3 cycles with standard plug gauge) | Measurement | 3N MIN | ||
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to terminal tip for 1 min in any direction | No damage, cracks, looseness, or play. Satisfy electrical and mechanical characteristics. | N/A | |
| Electrical | Contact Resistance (at 100mA or less, 1000Hz) | Measured | 50m MAX | |
| Insulation Resistance (DC 100V for 1 min) | Measured between body and conductor, non-contacting conductors, and non-contacting conductors when plug is inserted. | 100M MIN | ||
| Dielectric Strength (AC 500V rms (50~60Hz) for 1 min, trip current 0.5mA) | Tested between body and conductor, non-contacting conductors, and non-contacting conductors when plug is inserted. | Without damage, arcing, or breakdown. | ||
| Durability | Solderability Test (terminals dipped 1mm in solder bath at 2505 for 50.5 sec) | Solder wetting time | 3 sec or less | |
| Soldering area | Over 75% | |||
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: 180 for 120s; Peak Temp: 2605 within 20s. | No deformation of case or excessive looseness of terminals. Satisfy electrical characteristics. | N/A | |
| Resistance to Soldering Heat Test (Soldering Iron Method) | Bit Temp: 3305; Application Time: 30.5 sec. No excessive pressure on terminals. | No deformation of case or excessive looseness of terminals. Satisfy electrical characteristics. | N/A | |
| Humidity Test | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric conditions for 1 Hr. | N/A | N/A | |
| Heat Test | Stored at 702 for 96 Hours, then subjected to controlled recovery at room temperature for 1 Hour. | No damage on appearance. Satisfy mechanical and electrical characteristics. | N/A | |
| Cold Test | Stored at -253 for 96 Hours, then subjected to controlled recovery at room temperature for 1 Hour. | No damage on appearance. Satisfy mechanical and electrical characteristics. | N/A | |
| Life Test (Without Load) | Connection/Disconnection cycles with mating plugs/jacks | Speed: 10 to 25 cycles/min | 5000 cycles | |
| Life Test (With Load) | Connection/Disconnection cycles at rating condition (non-inductive load) | Speed: 10 to 20 cycles/min | 5000 cycles | |
| Contact Resistance | 0.1 | |||
| Disconnection Force | 0.8 to 2.0N | |||
| Other | Satisfy mechanical and electrical characteristics. | N/A | ||
| Temperature Cycling Test | 5 cycles of specified conditions, then 30 minutes in room ambient. | No deformation or cracks in molded part. | Insertion & Extraction Force: 3 to 20N | |
| Contact Resistance: | MAX. 30m | |||
| Insulation Resistance: | MIN. 100 M | |||
| Dielectric Withstanding Voltage: | 100VAC/min (between terminals) | |||
| Cold & Heat Shock Test | 5 cycles of specified conditions, then 30 minutes in room ambient. | No deformation or cracks in molded part. | Insertion & Extraction Force: 3 to 25N | |
| Contact Resistance: | MAX. 30m | |||
| Insulation Resistance: | MIN. 100 M | |||
| Dielectric Withstanding Voltage: | 500VAC/min (between terminals) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina