Waterproof TYPE C 6PIN female connector SHOU HAN USBC 0015IPX6 00 for robust electrical applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
TYPE-C 6PIN board-mount waterproof female connector designed for robust applications. It offers reliable electrical and mechanical performance within a wide temperature range and meets stringent waterproof and durability standards.
Product Attributes
- Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
- Origin: China
- Part No: USBC-0015IPX6-00
- Project: TYPE-C 6PIN
- Material Code: (Recommended O-ring size)
- Date: 202091
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| MECHANICAL | |||
| CONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 5-20N | |
| DISCONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 6~20N | |
| TERMINAL STRENGTH | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | ||
| ELECTRICAL | |||
| CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz | 30m | |
| INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M | |
| DIELECTRIC STRENGTH | AC 100V rms(50~60Hz) for 1 min trip current:0.5mA (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | Without damage to parts arcing or breakdown etc. | |
| DURABILITY | |||
| SOLDERABILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds | (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% | |
| RESISTANCE TO SOLDERING HEAT TEST (REFLOW SOLDERING) | Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| RESISTANCE TO SOLDERING HEAT TEST (SOLDERING IRON METHOD) | Bit temperature 3305. Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| HUMIDITY TEST | The jack shall be stored at a temperature of 402 and a humidity of 90%to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | ||
| HEAT TEST | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| COLD TEST | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| LIFE TEST (WITHOUT LOAD) | Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | ||
| LIFE TEST (LOAD) | At rating condition (non-inductive load). Connection and disconnection shall be made 5000 cycles at a speed 10 to 20 cycles / min. | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | |
| TEMPERATURE CYCLING TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned allowed to remain in room ambient condition for 30 minutes. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |
| COLD & HEAT SHOCK TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina