Robust SHOU HAN MICRO 180JB connector featuring corrosion resistant nickel plated shell and terminals

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the details for the MICRO 180 connector from Shenzhen Shouhan Technology Co., Ltd. It covers material composition, working conditions, electrical, mechanical, and environmental performance specifications, along with testing methods and standards.

Product Attributes

Brand: MICRO
Origin: Shenzhen, China
Company: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
Contact Person: (Drawn), (Check), (Approved)
Tel: 0755-27597601
Fax: 0755-27597491

Technical Specifications

Part No.	MICRO 180	Material Code	MICRO 180JB
Material Details
Plastic Part	LCP UL94V-0
Contact Terminal Part	C5191R-H, Nickel base, Gold plated contact area 1
Shell Part	C2680R-H, Nickel plated base 50, Nickel plated 80
Working Conditions
Working Voltage	30VAC RMS Max
Working Current	1.0 Ampere
Operating Temperature	-30+80
Electrical Performance
Test Item	Specification & Standard	Test Method & Reference Standard	Value
Contact Resistance	50m MAX	Measure impedance at contact area with low power current. Ref: EIA 364-23A	-
Insulation Resistance	100M MIN	Measure impedance between adjacent contact pins. Ref: EIA 364-21A	-
Withstand Voltage Test	100V DC / 100V AC 1 minute 0.5mA	Test high voltage between contact pins. Ref: EIA 364-20A	-
Mechanical Performance
Insertion Force	3.57kgf MAX	When matching with wire terminal, insertion speed 25mm/min. Ref: EIA 364-13A	-
Extraction Force	1.00kgf MIN	When matching with wire terminal, extraction speed 25mm/min. Ref: EIA 364-13A	-
Terminal Single PIN Retention Force	0.3 kgf MIN	Contact PIN retracting force from plastic at 25mm/min.	-
Durability Test	3000 cycles	Plug and unplug at a uniform speed of 600 cycles per hour. Ref: EIA 364-09A	-
Vibration Test	Amplitude 1.5mm, 10Hz-55Hz-10Hz cycle for 2 hours in X/Y/Z directions	Frequency 10Hz to 55Hz per minute, continuous test. Ref: EIA 364-28A	-
Environmental Performance
Solderability	Tin dipping area >95%	Product welding area immersed in 2355 tin bath for 50.5 seconds. Ref: MIL STD-202F	-
High Temperature Resistance	Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN	Product placed in 85 oven for 96 hours, then at room temperature for 3 hours. Ref: MIL STD-1344A	-
Low Temperature Resistance	Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN	Product placed in -40 oven for 96 hours, then at room temperature for 3 hours. Ref: MIL STD-1344A	-
Humidity Resistance	Appearance without obvious damage, Contact Resistance 100m MAX, Insulation Resistance 100M MIN	Product placed in 402, 9095%RH environment for 120 hours. Ref: EIA 364-31A	-
Corrosion Resistance	Appearance without obvious corrosion, Contact Resistance 50m MAX	Product placed in salt spray chamber with 5% salt concentration, 352 for 12 hours, then at room temperature for 1 hour. Ref: EIA 364-26A	-
Solderability (Reflow)	Appearance without obvious discoloration/bubbling; Solder foot wetting smooth	Recommended reflow curve: (details omitted as not fully specified)	-