Versatile SHOU HAN TYPE-C 6P LTH10.0 connector designed for connection force and mechanical robustness

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Specification

This document outlines the specifications for the TYPE-C 6P LTH10.0 product from Shenzhen Shouhan Technology Co., Ltd. It details the product's technical performance, mechanical and electrical characteristics, and durability under various conditions.

Product Attributes

Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
Product Name: TYPE-C
Model: TYPE-C 6P LTH10.0
Origin: Shenzhen, China (implied by company location)
Rating: DC 5V 3A
Operating Temperature Range: -30~80C

Technical Specifications

Item	Project	Test Conditions	Performance/Specification
Mechanical	Connection Force	After 3 cycles of connecting/disconnecting with standard plug gauge	0.52.0Kgf
Mechanical	Disconnecti on Force	After 3 cycles of connecting/disconnecting with standard plug gauge	0.82.0Kgf
Terminal Strength		Apply 0.1N/m (1kgf/cm) static load for 1 min in any direction to terminal tip. No damage, cracks, looseness, or play. Satisfy electrical and mechanical characteristics.
Electrical	Contact Resistance	Measured at small current ( 100mA) at 1000Hz	40m MAX
	Insulation Resistance	Apply 100V DC for 1 min between body and conductor, between non-contact conductors, and between non-contact conductors when plug is inserted.	100M MIN
	Dielectric Strength	Apply AC 100V (rms, 50~60Hz) for 1 min with trip current 0.5mA between body and conductor, between non-contact conductors, and between non-contact conductors when plug is inserted.	No damage, arcing, or breakdown.
Durability	Solderability Test	Terminal top dipped 1mm in solder bath at 2505 for 50.5 seconds.	(1) Solder wetting time 3 sec (2) Soldering area 75%
	Resistance to Soldering Heat Test (Reflow)	Reflow soldering conditions: Preheat to 180 (120s), peak temp 2605 within 20 seconds.	No deformation of case or excessive looseness of terminals. Satisfy electrical characteristics.
	Resistance to Soldering Heat Test (Soldering Iron)	Soldering iron bit temperature 3305, application time 30.5 seconds. No excessive pressure on terminals.	No deformation of case or excessive looseness of terminals. Satisfy electrical characteristics.
Humidity Test	Store at 402 and 90%-96% humidity for 96 hours, then maintain at standard atmospheric conditions for 1 hour.	Appearance without abnormality. Satisfy mechanical and electrical characteristics.
Heat Test	Store at 702 for 96 hours, then recover at room temperature for 1 hour.	Appearance without abnormality. Satisfy mechanical and electrical characteristics.
Cold Test	Store at -253 for 96 hours, then recover at room temperature for 1 hour.	Appearance without abnormality. Satisfy mechanical and electrical characteristics.
Life Test	Without Load	Connect and disconnect with mating plugs/jacks for 5000 cycles at 10-25 cycles/min.
Life Test	Load (Rating Condition, Non-Inductive)	Connect and disconnect for 5000 cycles at 10-20 cycles/min.	(1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Satisfy mechanical and electrical characteristics.
Temperature Cycling Test	Subject to 5 cycles of specified conditions, then return to room ambient for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals).
Cold & Heat Shock Test	Subject to 5 cycles of specified conditions, then return to room ambient for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals).