Water Resistant SHOU HAN TYPE-C 16PFS 2JCB1.6-H6.5 IPX8 Connector for Robust Electronic Applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The TYPE-C 16PFS 2JCB1.6-H6.5 IPX8 is a high-quality USB Type-C connector designed for robust applications. It features a 16-pin configuration and offers IPX8 water resistance, making it suitable for environments where protection against water ingress is crucial. This connector is rated for DC 20V 3A and operates within a temperature range of -30C to 80C.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO., LTD
- Origin: China
- Material: LCP (UL94 V-0 BLACK), SUS301 (NO PLATING), SILICONE (SI/60-65A, UL94 V-0 BLACK), ZINC ALLOY (NI30u"Min PLATED), C7025 (TIN80u"/Au3u"/NI30u" PLATED)
- Color: BLACK
- Certifications: UL94 V-0
- Model: TYPE-C 16PFS 2JCB1.6-H6.5 IPX8
Technical Specifications
| Item | Test Conditions | Performance | Specification |
| MECHANICAL | |||
| 1. CONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.5-2.0 Kgf | |
| 2. DISCONNECTION FORCE | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.8-2.0 Kgf | |
| 3. TERMINAL STRENGTH | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | ||
| ELECTRICAL | |||
| 3.1 CONTACT RESISTANCE | Measured at small current (100mA or less) 1000Hz | 40 m MAX | |
| 3.2 INSULATION RESISTANCE | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | 100 M MIN | |
| 3.3 DIELECTRIC STRENGTH | AC 100V rms (50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | Without damage to parts, arcing or breakdown etc. | |
| DURABILITY | |||
| 4.1 SOLDERABILITY TEST | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. | |
| 4.2 RESISTANCE TO SOLDERING HEAT TEST (REFLOW) | Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180, 120s after the P.C.B entered into the soldering equipment. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | |
| Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. However excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | ||
| 4.3 HUMIDITY TEST | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | ||
| 4.4 HEAT TEST | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery measurement. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.5 COLD TEST | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | |
| 4.6 LIFE TEST | Without load: Connection and disconnection shall be made with the mating plugs and jacks for 10000 cycles at a speed of 10 to 25 cycles/min. | (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | |
| Load: At rating condition (non-inductive load). Connection and disconnection shall be made 10000 cycles at a speed 10 to 20 cycles / min. | |||
| 4.7 TEMPERATURE CYCLING TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 100VAC/MIN (Between Terminals). | |
| 4.8 COLD & HEAT SHOCK TEST | The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 500VAC/MIN (Between Terminals). | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina