USB Connector SHOU HAN AM 180 CB Providing Excellent Electrical Insulation and Mechanical Durability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for a USB connector (AM 180CB) manufactured by SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It details the product's usage, environmental conditions, and comprehensive technical performance under various test conditions, including electrical, mechanical, and durability tests.

Product Attributes

Brand: SHOUHAN TECHNOLOGY
Origin: Shenzhen, China

Technical Specifications

Item	Test Conditions	Performance
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE	Measured at small current (100mA or less) 1000Hz	50m MAX
INSULATION RESISTANCE	Apply a voltage of 100V DC for 1 min to specified portions	100M MIN
DIELECTRIC STRENGTH	AC 500V rms (50~60Hz) for 1 min (Trip current: 0.5mA) to specified portions	No damage to parts, arcing, or breakdown
MECHANICAL CHARACTERISTICS
CONNECTION FORCE	Measured after connecting and disconnecting using standard plug gauge 3 times	0.7~4 Kgf MAX
DISCONNECTION FORCE	Measured after connecting and disconnecting using standard plug gauge 3 times	0.7~4 Kgf MAX
TERMINAL STRENGTH	A static load of 10N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction	No damage to terminal (cracks, looseness, play); electrical and mechanical characteristics shall be satisfied
DURABILITY
SOLDERABILITY TEST	Terminals dipped 1mm in solder bath (2305) for 50.5 seconds	Solder wetting time 3 seconds; Soldering area 75%
RESISTANCE TO SOLDERING HEAT TEST	Soldering iron method: Bit temperature 3305, application time 30.5 seconds (no excessive pressure)	No deformation of case or excessive looseness of terminals; electrical characteristics satisfied
HUMIDITY TEST	Stored at 402 and 90% to 96% humidity for 96 hours, then maintained at standard atmospheric condition for 1 hour	-
HEAT TEST	Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour	No damage to appearance; mechanical and electrical characteristics satisfied
COLD TEST	Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour	No damage to appearance; mechanical and electrical characteristics satisfied
LIFE TEST	Without load: Connection/disconnection with mating plugs for 5000 cycles (10 to 25 cycles/min)	Contact Resistance 0.1; Disconnection Force = 7N; Mechanical and electrical characteristics satisfied
LIFE TEST	With load (DC 48V 0.2A, non-inductive load): Connection/disconnection for 5000 cycles (10 to 20 cycles/min)
TEMPERATURE CYCLING TEST	5 cycles of specified temperature conditions (-40 to 80), then 30 minutes at room ambient	No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals)
COLD & HEAT SHOCK TEST	5 cycles of specified temperature conditions (-20 to 70), then 30 minutes at room ambient	No deformation or cracks in molded part; Insertion & Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals)