Waterproof USB Type C connector SHOU HAN USBC-0032IPX8-00 featuring IPX8 protection for connectivity
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification details the TYPE-C waterproof USB connector (USBC-0032IPX8-00) from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. Designed for reliable performance in various environmental conditions, it offers robust mechanical and electrical characteristics suitable for demanding applications. The product features a waterproof design (IPX8) and is rated for specific temperature ranges and electrical loads.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO., LTD.
- Origin: Shenzhen, China
- Model: USBC-0032IPX8-00
- Waterproof Rating: IPX8
- Material Code: PRACTICAL TEMPERATURE RANGE
- Standard Atmospheric Conditions: Temperature 5~35, Humidity 45%~85%, Pressure 86Kpa~106Kpa
Technical Specifications
| Item | Test Conditions | Performance/Specification |
| MECHANICAL () | ||
| 1. CONNECTION FORCE () | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 5-20N |
| 2. DISCONNECTION FORCE () | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 8~20N |
| 3. TERMINAL STRENGTH () | A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied. | N/A (Satisfied) |
| ELECTRICAL () | ||
| 3.1 CONTACT RESISTANCE () | Measured at small current (100mA or less) 1000Hz | 40m |
| 3.2 INSULATION RESISTANCE () | Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted | 100M |
| 3.3 DIELECTRIC STRENGTH () | AC 100V rms(50~60Hz) for 1 min. Trip current: 0.5mA. Tested between: (1) Body and conductor (2) Conductors not to be contact (3) Conductors not to be when plug is inserted | Without damage to parts, arcing or breakdown etc. |
| RATING () | ||
| AC 250V 3A | ||
| URABILITY () | ||
| 4.1 SOLDERABILITY TEST () | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. | (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75% |
| 4.2 RESISTANCE TO SOLDERING HEAT TEST () | Reflow Soldering Conditions: Preheat: 180 for 120s. Tallest Temperature: 2605 within 20 seconds. Soldering Iron Method: Bit temperature 3305, application time 30.5 sec. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| 4.3 HUMIDITY TEST () | Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. |
| 4.4 HEAT TEST () | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour. | Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. |
| 4.5 COLD TEST () | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour. | Appearance no abnormal, mechanical and electrical characteristics shall be satisfied. |
| 4.6 LIFE TEST () | Without Load: 5000 cycles at 10 to 25 cycles/min. Load: At rating condition (non-inductive load): 5000 cycles at 10 to 20 cycles/min. | (1) Contact resistance 0.1 (2) Disconnection force 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. |
| 4.7 TEMPERATURE CYCLING TEST () | Subjected to 5 cycles of specified temperature conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| 4.8 COLD & HEAT SHOCK TEST () | Subjected to 5 cycles of specified temperature conditions, then allowed to remain in room ambient for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina