Mechanical electrical specification SHOU HAN 10.0 180 ZCZB-HJ connector for technical applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the technical details and performance requirements for the 10.0 180ZCZB-HJ product from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details mechanical, electrical, and durability characteristics, ensuring product quality and reliability under specified operating conditions.

Product Attributes

Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
Origin: China

Technical Specifications

Item	Project	Test Conditions	Performance	Specification
RATING		DC 30V 1.5A
		-25~85C	-25C~+85C
STANDARD ATMOSPHEIC CONDITIONS		(1) 5~35 (2) 45%~85% (3) 86 Kpa~106Kpa
MECHANICAL
1	CONNECTION FORCE	PLUG GAUGE 3		3.57Kgf MAX
2	DISCONNECTI ON FORCE	PLUG GAUGE 3		1.02Kgf MIN
	TERMINAL STRENGTH	1 0.1N/m(1kgf/cm).
ELECTRICAL
3.1	CONTACT RESISTANCE	100 m A 1000Hz		30m MAX
3.2	INSULATION RESISTANCE	100V DC 1 1 2 3		1000M MIN
3.3	DIELECTRIC STRENGTH	AC 500V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA (1) BETWEEN BODYAND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACL (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED DC 500V 1 MIN AC 500V 50Hz/min 1 0.5mA, : 1 2 3
DURABILITY
4.1	SOLDER- ABILITY TEST	1 1mm ,2305,3 0.5 275%	3
4.2	RESISTANCE TO SOLDERING HEAT TEST	REFLOW SOLDERING CONDITIONS: PREHEAT:TEMPERATURE ON THE COPPER FOIL SURFACE SHOULD REACH 180 .120 S AFTER THE P.C.B ENTERED INTO THE SOLDERING EQUIPMENT. TALLEST TEMPERATURE:TEMPERATURE ON THE COPPER FOIL SURFACE SHOULD REACH THE PEAK IN 5 TEMPERATURE OF 2305 WITH SECONDS. WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED :180,120s :23055 SOLDERING IRON METHOD: BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON30.5 SEC HOWEVER EXCESSIVE PRESSURE SHALL NOT BE APPLIED TO THE TERMINAL 3305 30.5 WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED
4.3	HUMIDITY TEST	40290~96% Hr 96 1
4.4	HEAT TEST	70296 1
4.5	COLD TEST	-25396 1
4.6	LIFE TEST	LOAD AT RATING CONDITION NON-INDUCTIVE LOAD (1) ()1 10-20 5000 (2) WITHOUT LOAD CONNECTION AND DISCONNECTION SHALL BE MADE WITH THE MATING PLUGS AND JACKS FOR 5000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN Plug()1 10-255000	(1) 0.1 (2) 0.8~2.0N (3) :,
4.7	TEMPARATURE CYCLINGTEST	5 30 Temp() 70 -20 1 cycle 8 hours Hours 0.5 0.5	3N 20N 30m 100 M 100VAC
4.8	COLD&HEAT SHOCK TEST	5 30 TEMP () 70 -20 Hours 0.5 0.5	3N 25N 30m 100 M 500VAC