Durable SHOU HAN AM 180 degree USB connector with practical temperature range and mechanical testing

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document specifies the technical requirements for the USB AM 180 connector from SHENZHEN SHOUHAN TECHNOLOGY CO., LTD. It details the product's electrical, mechanical, and durability specifications, intended for use within a practical temperature range of -25 to 85. Note: This product is designed for manual soldering only.

Product Attributes

Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
Origin: China
Product Name: USB AM 180
Part Number: AM 180

Technical Specifications

Item	Description	Test Conditions	Performance Specification
RATING	DC Voltage		30V
RATING	Current		1.5A
PRACTICAL TEMPERATURE RANGE	Usage Range		-25 ~ 85
PRACTICAL TEMPERATURE RANGE	Standard Atmospheric Conditions for Testing	Temperature: 5 to 35 Humidity: 45% to 85% Pressure: 86Kpa to 106Kpa
MECHANICAL	CONNECTION FORCE	After connecting and disconnecting using standard plug gauge 3 times.	3.57Kgf MAX
MECHANICAL	DISCONNECTION FORCE	After connecting and disconnecting using standard plug gauge 3 times.	1.02Kgf MIN
TERMINAL STRENGTH	Static Load	0.1N/m(1kgf/cm) applied to the tip of the terminal for 1 min in any direction.	No damage, satisfies electrical and mechanical characteristics.
ELECTRICAL	CONTACT RESISTANCE	Measured at small current (100mA or less), 1000Hz	30m MAX
	INSULATION RESISTANCE	Apply 100V DC for 1 min between various portions (body/conductor, non-contacting conductors, conductors when plug is inserted).	1000M MIN
	DIELECTRIC STRENGTH	Apply AC 500V rms (50~60Hz) for 1 min, Trip Current: 0.5mA between various portions.	No arcing or breakdown.
DURABILITY	SOLDERABILITY TEST	Terminals dipped 1mm in solder bath at 2305 for 50.5 seconds.	Solder wetting time 3 sec; Soldering area > 75%.
	RESISTANCE TO SOLDERING HEAT TEST	Soldering iron method: Bit temperature 3305, application time 30.5 sec (no excessive pressure).	No deformation of case or excessive looseness of terminals; satisfies electrical characteristics.
	HUMIDITY TEST	Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric conditions for 1 Hr.	No appearance damage; satisfies mechanical and electrical characteristics.
	HEAT TEST	Stored at 702 for 96 Hours, then subjected to controlled recovery for 1 Hour.
	COLD TEST	Stored at -253 for 96 Hours, then subjected to controlled recovery conditions for 1 Hour.	No appearance damage; satisfies mechanical and electrical characteristics.
LIFE TEST	Without Load	Connection and disconnection for 5000 cycles at 10 to 25 cycles/min.
LIFE TEST	With Load (Rating Condition, Non-Inductive Load)	Connection and disconnection for 5000 cycles at 10 to 20 cycles/min.	Contact Resistance 0.1; Disconnection Force 0.8 to 2.0N; Satisfies mechanical and electrical characteristics.
TEMPERATURE CYCLING TEST	Conditions	5 cycles of specified temperature profile (e.g., -20 to 80).	No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals).
TEMPERATURE CYCLING TEST	Recovery	30 minutes in room ambient condition after cycling.
COLD & HEAT SHOCK TEST	Conditions	5 cycles of specified temperature shock profile (e.g., -20 to 70).	No deformation or cracks in molded part. Insertion/Extraction Force: 3 to 25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals).
COLD & HEAT SHOCK TEST	Recovery	30 minutes in room ambient condition after cycling.