SHOU HAN TYPE-C 6P CB0.8 073 connector rated DC5V 3A for in various electronic device applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the TYPE-C 6P CB0.8(073) connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's electrical, mechanical, and durability characteristics, designed for reliable performance within a specified temperature range.

Product Attributes

Brand: (Shenzhen Shouhan Technology Co., Ltd.)
Origin: Shenzhen, China
Model: TYPE-C 6P CB0.8(073)

Technical Specifications

Item	Test Conditions	Performance Specification
RATING
Rated Value		DC5V 3A
PRACTICAL TEMPERATURE RANGE
Operating Temperature		-30~80
STANDARD ATMOSPHEIC CONDITIONS
Temperature	For measurements and tests	5 to 35
Humidity	For measurements and tests	45% to 85%
Pressure	For measurements and tests	86Kpa to 106Kpa
MECHANICAL
Connection Force	After 3 cycles of connecting and disconnecting using standard plug gauge	0.5-2.0Kgf
Disconnection Force	After 3 cycles of connecting and disconnecting using standard plug gauge	0.8~2.0Kgf
Terminal Strength	Static load of 0.1N/m (1kgf/cm) applied to terminal tip for 1 min in any direction	No damage to terminal; electrical and mechanical characteristics satisfied.
ELECTRICAL
Contact Resistance	Measured at small current (100mA) at 1000Hz	50m MAX
Insulation Resistance	Apply 100V DC for 1 min between specified portions	100M MIN
Dielectric Strength	AC 100V rms (50~60Hz) for 1 min, trip current: 0.5mA, between specified portions	No damage, arcing, or breakdown
DURABILITY
Solderability Test	Terminal tops dipped 1mm in solder bath at 2505 for 50.5 seconds	Solder wetting time 3 sec; Soldering area > 75%
Resistance to Soldering Heat Test (Reflow)	Preheat: 180 for 120s; Peak temp: 2605 within 20s	No deformation of case or excessive looseness of terminals; electrical characteristics satisfied.
Resistance to Soldering Heat Test (Soldering Iron)	Bit temperature 3305, application time 30.5 sec	No deformation of case or excessive looseness of terminals; electrical characteristics satisfied.
Humidity Test	Stored at 402 and 90%-96% humidity for 96 hours, then 1 hour at standard atmospheric conditions	Appearance no abnormal; mechanical and electrical characteristics satisfied.
Heat Test	Stored at 702 for 96 hours, then 1 hour at room temperature	Appearance no abnormal; mechanical and electrical characteristics satisfied.
Cold Test	Stored at -253 for 96 hours, then 1 hour at room temperature	Appearance no abnormal; mechanical and electrical characteristics satisfied.
Life Test (Without Load)	5000 cycles of connection/disconnection at 10-25 cycles/min	Contact Resistance 0.1; Disconnection Force 0.8-2.0N; Mechanical and electrical characteristics satisfied.
Life Test (With Load)	5000 cycles of connection/disconnection at 10-20 cycles/min under rating condition (non-inductive load)	Contact Resistance 0.1; Disconnection Force 0.8-2.0N; Mechanical and electrical characteristics satisfied.
Temperature Cycling Test	5 cycles of specified temperature conditions, then 30 min at room ambient	No deformation or cracks in molded part; Insertion & Extraction Force: 3-20N; Contact Resistance: Max.30m; Insulation Resistance: Min.100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals).
Cold & Heat Shock Test	5 cycles of specified temperature conditions, then 30 min at room ambient	No deformation or cracks in molded part; Insertion & Extraction Force: 3-25N; Contact Resistance: Max.30m; Insulation Resistance: Min.100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals).