connection SHOU HAN AF 10.0 CC connector engineered for stable electrical and mechanical performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification details the requirements for the USB AF 10.0 CC product from Shenzhen Shouhan Technology Co., Ltd. It covers its electrical, mechanical, and durability characteristics, designed for operation within a specific temperature and atmospheric range. The product is suitable for applications requiring reliable connection and disconnection under various conditions.

Product Attributes

Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Origin: Shenzhen, China
Model: AF 10.0 CC
Contact: Tel: 0755-27597601, Fax: 0755-27597491

Technical Specifications

Item	Test Conditions	Performance	Specification
RATING
Rated Value			DC 30V 1.5A
Operating Temperature Range			-25~85C
STANDARD ATMOSPHERIC CONDITIONS
Temperature	Unless otherwise specified		5C TO 35
Humidity	Unless otherwise specified		45% TO 85%
Pressure	Unless otherwise specified		86Kpa TO 106Kpa
MECHANICAL
Connection Force	After connecting and disconnecting using standard plug gauge 3 times		35N MAX
Disconnection Force	After connecting and disconnecting using standard plug gauge 3 times		8N MIN
Terminal Strength	Static load of 0.1N/m (1kgf/cm) applied to terminal tip for 1 min in any direction	No damage to terminal (cracks, looseness, play); satisfied electrical and mechanical characteristics
ELECTRICAL
Contact Resistance	Measured at small current (100mA or less), 1000Hz		30m MAX
Insulation Resistance	Apply 100V DC for 1 min (between body and conductor; between non-contacting conductors; between non-contacting conductors when plug is inserted)		1000M MIN
Dielectric Strength	Apply AC 500V (rms, 50~60Hz) for 1 min, trip current: 0.5mA (between body and conductor; between non-contacting conductors; between non-contacting conductors when plug is inserted)	No insulation damage, arcing, or breakdown
DURABILITY
Solderability Test	Terminal top dipped 1mm in solder bath at 2505 for 50.5 seconds	(1) Solder wetting time 3 sec (2) Soldering area > 75%
Resistance to Soldering Heat Test (Reflow Soldering)	Preheat: Copper foil surface reaches 180, 120s after PCB enters equipment. Peak Temp: Copper foil surface reaches 2505 within 5 seconds.	No deformation of case or excessive looseness of terminals; satisfied electrical and mechanical characteristics
Resistance to Soldering Heat Test (Reflow Soldering)	(Soldering Iron Method) Bit temp 3305, application time 30.5 sec (no excessive pressure on terminal)	No deformation of case or excessive looseness of terminals; satisfied electrical and mechanical characteristics
Humidity Test	Stored at 402 and 90%-96% humidity for 96 hours, then maintained at standard atmospheric conditions for 1 hour
Heat Test	Stored at 702 for 96 hours, then subjected to controlled recovery for 1 hour	No damage on appearance; satisfied mechanical and electrical characteristics
Cold Test	Stored at -253 for 96 hours, then subjected to controlled recovery for 1 hour	No damage on appearance; satisfied mechanical and electrical characteristics
Life Test	Connection/disconnection 5000 cycles at 10-20 cycles/min (rated condition, non-inductive load)	(1) Contact Resistance 0.1 (2) Disconnection Force 0.8 to 2.0N (3) Satisfied mechanical and electrical characteristics
Life Test	Connection/disconnection 5000 cycles at 10-25 cycles/min (no load)
Temperature Cycling Test	Subjected to 5 cycles of conditions (shown in figure), then returned to room ambient for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N Contact Resistance: MAX.30M Insulation Resistance: MIN.100 M Dielectric Withstanding Voltage: 100VAC/min (between terminals)
Temperature Cycling Test	Temp(): 70 (0.5hr) -> 0 (1hr) -> -20 (8hr) -> 0 (0.5hr) -> 70 (0.5hr)
Cold & Heat Shock Test	Subjected to 5 cycles of conditions (shown in figure), then returned to room ambient for 30 minutes.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N Contact Resistance: MAX.30M Insulation Resistance: MIN.100 M Dielectric Withstanding Voltage: 500VAC/min (between terminals)
Cold & Heat Shock Test	Temp(): 70 (1hr) -> 0 (0.5hr) -> -20 (8hr) -> 0 (0.5hr) -> 70 (0.5hr)