Tested SHOU HAN 10.5mm AF USB offering connection disconnection force and strong terminal strength

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the USB-AF 10.5mm AF USB product from SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD. It details the product's performance, electrical, and mechanical characteristics under various test conditions, including temperature range, standard atmospheric conditions, connection/disconnection forces, resistance, insulation, dielectric strength, durability, and environmental tests.

Product Attributes

Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD)
Origin: (Shenzhen)
Model: USB-AF 10.5mm AF USB

Technical Specifications

Item	Test Conditions	Performance	Unit	Min	Typ	Max
Mechanical Characteristics	Connection Force	Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times.	Kgf		3.57
	Disconnection Force	Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times.	Kgf	1.02
	Terminal Strength	A static load of 0.1N/m(1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical, and mechanical characteristics shall be satisfied.
Electrical Characteristics	Contact Resistance	Measured at small current (100mA or less) 1000Hz	m			30
Electrical Characteristics	Insulation Resistance	Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. DC 100V 1 min.	M	1000
Dielectric Strength	AC 500V ims(50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. DC 500V 1 min.
Durability	Solderability Test	The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%.
Durability	Resistance to Soldering Heat Test	Reflow soldering conditions: Preheat: Temperature on the copper foil surface should reach 180. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 within 20 seconds. Soldering iron method: Bit temperature 3305 Application time of soldering iron 30.5 sec. Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
Humidity Test	The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr.
Heat Test	The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery. Appearance no abnormal, mechanical and electrical characteristics shall be satisfied.
Cold Test	The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour. Appearance no abnormal, mechanical and electrical characteristics shall be satisfied.
Life Test	Without Load	Connection and disconnection shall be made with the mating plugs and jacks for 1500 cycles at a speed of 10 to 25 cycles/min.	Cycles		1500
Life Test	Load	At rating condition (non-inductive load) connection and disconnection shall be made 1500 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 7N (3) Mechanical and electrical characteristics shall be satisfied.
Temperature Cycling Test	The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned allowed to remain in room ambient condition for 30 minutes. Product cannot deform or crack. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals).
Cold & Heat Shock Test	The jack shall be subjected to 5 cycles of the following conditions, and then shall be returned and allowed to remain in room ambient condition for 30 minutes. Product cannot deform or crack. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals).