Robust Type-C Connector with Gold Plated Contact Area, Nickel Base Terminals and 3A Current Rating for Reliable Performance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Robust SHOU HAN TYPE-C 16P LCH13.0-A 143 Connector
High-quality USB Type-C connector featuring gold-plated contact area and nickel base terminals, designed for demanding electronic applications with robust construction and reliable performance.
Product Overview
The TYPE-C 16P LCH13.0-A connector is engineered for various electronic applications with robust construction. It features LCP+30%G.F core material, C7025 terminals with gold plating, and SUS304 stainless steel shell. Supporting a rated current of 3A and operating within -30°C to +80°C temperature range, this connector is suitable for demanding environments and SMT reflow soldering processes.
Product Attributes
- Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
- Product Name: TYPE-C 16P LCH13.0-A
- Model Number: 143
- Core Material: LCP+30%G.F UL94V-0
- Terminal Material: C7025; Nickel base 30-50U" MIN, Gold plated contact area (AU 1U"), Gold plated solder area
- Shell Material: SUS304 T=0.30mm; Nickel plated surface 30-50U" MIN
- Origin: China
- Certifications: UL94V-0
Technical Specifications
| Item | Specification | Test Conditions |
|---|---|---|
| Rated Current | 3A | |
| Contact Resistance | 40mΩ MAX (Initial) 50mΩ MAX (After test) |
Measured at small current (100mA or less) 1000Hz |
| Insulation Resistance | 100MΩ MIN | Apply a voltage of 100V DC for 1 min |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min (Trip Current: 0.5mA) | (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted |
| Overall Insertion Force | 5-20N | |
| Overall Insertion Force (After durability) | 5-20N | |
| Terminal Strength | No damage such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | Apply a static load of 0.1N/m (1kgf/cm) to the tip of the terminal for 1 min in any direction. |
| High Temperature Resistance | No blistering, melting, or other defects in plastic. Discoloration and warping within tolerance. | SMT reflow soldering (Peak 260±5°C) |
| Solderability Test | Soldering area over 95% | Product must undergo solder test. |
| Resistance to Soldering Heat Test (Reflow) | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | Preheat: 180°C, 120s. Peak Temperature: 260±5°C within 20 seconds. |
| Resistance to Soldering Heat Test (Iron) | No deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | Bit Temperature 330±5°C, Application time 3.0±0.5 sec. |
| Humidity Test | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | Stored at 40±2°C and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. |
| Heat Test | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | Stored at 70±2°C for 96 hours, then subjected to controlled recovery for 1 Hr. |
| Cold Test | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. | Stored at -25±3°C for 96 hours, then subjected to controlled recovery for 1 Hr. |
| Life Test (No Load) | Contact Resistance ≤ 0.1Ω Mechanical and Electrical Characteristics shall be satisfied. |
10000 cycles at a speed of 10 to 25 cycles/min. |
| Life Test (With Load) | Contact Resistance ≤ 0.1Ω Disconnection Force 0.8 to 2.0N Mechanical and Electrical Characteristics shall be satisfied. |
10000 cycles at a speed of 10 to 20 cycles/min (Rating condition, Non-inductive load). |
| Temperature Cycling Test | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N Contact Resistance: Max. 30mΩ Insulation Resistance: Min. 100 MΩ Dielectric Withstanding Voltage: 100VAC/min (Between terminals) |
5 cycles of specified temperature profile (80°C to -40°C). |
| Cold & Heat Shock Test | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N Contact Resistance: Max. 30mΩ Insulation Resistance: Min. 100 MΩ Dielectric Withstanding Voltage: 500VAC/min (Between terminals) |
5 cycles of specified temperature profile (70°C to -20°C). |
| Working Temperature | -30°C to +80°C | |
| Standard Atmospheric Conditions for Testing | Temperature: 5°C to 35°C Humidity: 45% to 85% Pressure: 86Kpa to 106Kpa |
Unless otherwise specified. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina