USB connector SHOU HAN AF 90 WJDG ZB with DC 30V 1.5A rating and tested under standard atmospheric conditions
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The AF 90 WJDG ZB is a USB connector designed for reliable performance within a practical temperature range of -25~85C. It operates at DC 30V and 1.5A, meeting standard atmospheric conditions for testing. This product is manufactured by SHENZHEN SHOUHAN TECHNOLOGY CO., LTD.
Product Attributes
- Brand: SHOUHAN TECHNOLOGY
- Origin: Shenzhen, China
Technical Specifications
| Item | Test Conditions | Performance | |||
|---|---|---|---|---|---|
| RATING | DC 30V 1.5A | ||||
| PRACTICAL TEMPERATURE RANGE | -25~85C | ||||
| STANDARD ATMOSPHEIC CONDITIONS | (1) Temperature | 5~35 | |||
| (2) Humidity | 45%~85% | ||||
| (3) Pressure | 86Kpa~106Kpa | ||||
| MECHANICAL | CONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 35N MAX | ||
| DISCONNECTION FORCE | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 8N MIN | |||
| TERMINAL STRENGTH | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION | THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| ELECTRICAL | CONTACT RESISTANCE | MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz | 30m MAX | ||
| INSULATION RESISTANCE | APPLY A VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS | 1000M MIN | |||
| DIELECTRIC STRENGTH | AC 500V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |||
| (1) BETWEEN BODY AND CONDUCTOR (2) BETWEEN CONDUCTORS NOT TO BE CONTACL (3) BETWEEN CONDUCTORS NOT TO BE WHEN PLUG IS INSERTED | |||||
| DURABILITY | SOLDERA-BILITY TEST | (1) THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2305 FOR 30.5 SECONDS | SOLDER WETTING TIME SHALL BE 3 SEC OR LESS | ||
| (2)THE AREA OF SOLDERING SHOULD BE OVER 75% | |||||
| RESISTANCE TO SOLDERING HEAT TEST | REFLOW SOLDERING CONDITIONS | PREHEAT:180, 120s. TALLEST TEMPERATURE:2305, 5 SECONDS. | WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | ||
| SOLDERING IRON METHOD | BIT TEMPERATURE 3305 APPLICATION TIME OF SOLDERING IRON 30.5 SEC HOWEVER EXCESSIVE PRESSURE SHALL NOT BE APPLIED TO THE TERMINAL | WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| HUMIDITY TEST | STORED AT 402 AND 90%TO 96% RH FOR 96 Hr, THEN MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr | ||||
| HEAT TEST | STORED AT 702 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 HOUR | APPEARANCE NO DAMAGE. MECHANICAL AND ELECTRICAL CHARACTERISTICS SATISFIED | |||
| COLD TEST | STORED AT -253 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 HOUR | APPEARANCE NO DAMAGE. MECHANICAL AND ELECTRICAL CHARACTERISTICS SATISFIED | |||
| LIFE TEST | WITHOUT LOAD CONNECTION AND DISCONNECTION | 5000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN | (1) CONTACT RESISTANCE SHALL BE 0.1 (2) DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N (3) MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | ||
| LOAD: AT RATING CONDITION NON-INDUCTIVE LOAD | 5000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN | ||||
| TEMPARATURE CYCLING TEST | CYCLE CONDITIONS | 5 CYCLES OF THE FOLLOWING: 70 (0.5h) -> 80 (0.5h) -> 0 (1h) -> -40 (0.5h) -> -20 (1h) | NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION & EXTRACTION FORCE:3 TO 20N. CONTACT RESISTANCE:MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN(BETWEEN TERMINALS) | ||
| THEN ALLOWED TO REMAIN IN ROOM AMBIENT CONDITION FOR 30 MINUTES | |||||
| COLD&HEAT SHOCK TEST | CYCLE CONDITIONS | 5 CYCLES OF THE FOLLOWING: 70 (0.5h) -> -20 (0.5h) | NO DEFORMATION OR CRACKS IN MOLDED PART. INSERTION & EXTRACTION FORCE:3 TO 25N. CONTACT RESISTANCE:MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN(BETWEEN TERMINALS) | ||
| THEN ALLOWED TO REMAIN IN ROOM AMBIENT CONDITION FOR 30 MINUTES | |||||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina