Robust SHOU HAN TYPE-C 2P 180 LTH8.8 Connector with Comprehensive Mechanical and Electrical Test Specifications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the technical details for the TYPE-C 2P 180 LTH8.8 connector from Shenzhen Shouhan Technology Co., Ltd. It details the product's ratings, environmental operating conditions, and comprehensive mechanical, electrical, and durability test specifications.

Product Attributes

Brand: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Origin: Shenzhen, China
Product Name: TYPE-C 2P 180 LTH8.8
Material Code: TYPE-C 2P 180 LTH8.8

Technical Specifications

Category	Item	Test Conditions	Performance/Specification
RATING	Rating	5 V 3 A	N/A
RATING	Practical Temperature Range	-30C~85C	Within -30C~85C
MECHANICAL	Connection Force	After connecting and disconnecting using standard plug gauge 3 times.	0.5~2.0Kgf
MECHANICAL	Disconnecti O Force	After connecting and disconnecting using standard plug gauge 3 times.	0.6~2.0Kgf
ELECTRICAL	Contact Resistance	Measured at small current (100mA or less) 1000Hz	40m MAX
	Insulation Resistance	Apply a voltage of 100V DC for 1 min to following portions: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted	100M MIN
	Dielectric Strength	AC 100V ims(50~60Hz) for 1 min, Trip Current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted	Without damage to parts arcing or breakdown etc.
DURABILITY	Solderability Test	Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds.	(1) Solder wetting time: 3 sec (2) Soldering area: > 75%
DURABILITY	Resistance to Soldering Heat Test (Reflow)	Preheat: 180, 120s. Tallest Temperature: 2605 within 20 seconds.	Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied.
HUMIDITY TEST	Humidity Test	Stored at 402 and 90% to 96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
HEAT TEST	Heat Test	Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
COLD TEST	Cold Test	Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr.	No damage on appearance. Mechanical and electrical characteristics shall be satisfied.
LIFE TEST	Life Test (Without Load)	Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min.	N/A
LIFE TEST	Life Test (With Load)	Connection and disconnection for 5000 cycles at a speed of 10 to 20 cycles/min (Rating condition, Non-inductive load).	(1) Contact Resistance: 0.1 (2) Disconnection Force: 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied.
TEMPERATURE CYCLING TEST	Temperature Cycling Test	5 cycles of specified temperature conditions, then 30 minutes in room ambient.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals).
COLD&HEAT SHOCK TEST	Cold & Heat Shock Test	5 cycles of specified temperature conditions, then 30 minutes in room ambient.	No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals).