SOFNG SD 001 SMT Push Pull Memory Card Socket Durable Short Body Compatible with SD Card and T Flash

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This product is a SMT (Surface Mount Technology) push-pull type short body memory card socket designed for consumer electronics. It supports SD Card and T-Flash formats, offering reliable connectivity for data storage applications. The socket is engineered for durability and ease of use with its push-pull mechanism.

Product Attributes

Brand: SOFNG
Operation Type: SMT & Push-Pull
Form Factor: Short Body
Supported Cards: SD Card & T-Flash
Material Declaration:
- Opening Terminal: Bronze Alloy (Y=0.25mm)
- Housing: Phosphor Bronze Alloy (Y=0.25mm)
- Spring Terminal 1: C5191-EH Phosphor Copper Alloy (Y=0.2mm) G/F
- Spring Terminal 2: C5191-EH Phosphor Copper Alloy (Y=0.2mm) G/F
- Plastic Base: LCP High-Temperature Resistant Plastic (260C)

Technical Specifications

Specification	Details	Better Product	Average Product
Model No.	SD-001
Dimensions (LWH)	17.20mm 26.40mm 2.85mm
Contact Rating	25mA, 24V DC
Initial Contact Resistance		30m max.	50m max.
Insulation Resistance	100M min.	500V DC
Withstand Voltage		500V AC for 1 minute	350V AC for 1 minute
Durability (No Load)		6,500 Cycles	5,500 Cycles
Durability (Rated Load)		5,500 Cycles	4,000 Cycles
Operating Force (Inward)	6.09.0N (1N.=100gram-force)
Operating Force (Exiting)	5.08.0N (1N.=100gram-force)
Storage Temperature	-35+85
Solderability (IR Reflow)	Max. 255, 5 sec.
Solderability (Manual)	Max. 350, 3 sec.

Pin Definition

Pin No.	Pin Name	Type	Description
P	CD/DAT3	I/O/PP	Card Detect/Date Line [Bit 3]
P	CMD	PP	Command/Response
P	Vss1	S	Supply voltage ground
P	VDD	S	Supply voltage
P	CLK	I	Clock
P	Vss2	S	Supply voltage ground
P	DAT 0	I/O/PP	Date Line [Bit 0]
P	DAT 1	I/O/PP	Date Line [Bit 1]
P	DAT 2	I/O/PP	Date Line [Bit 2]

Notice

SOFNG company reserves the right of final interpretation.
This document is prohibited from being leaked or reproduced.
Unauthorized modification is invalid.
Products do not belong to hazardous waste; when waste, they can be entrusted to recyclers for recycling and regeneration processing.
During transportation, this product should not directly contact water, acidic or alkaline chemical substances, or be placed in an environment containing such gases. Be aware of the risk of slipping and tipping. Avoid collision or extrusion during transportation. Maintain moderate temperature and humidity (normal temperature 25, humidity within 50) to prevent material deformation or oxidation.