Type C connector SHOU HAN TYPE C16P3MDDGP073 rated DC 5V 3A suitable for various industrial applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the TYPE-C16P3MDDGP073, a Type-C connector developed by Shenzhen Shouhan Technology Co., Ltd. It details the product's ratings, operating conditions, and performance criteria across mechanical, electrical, and durability tests, ensuring reliability and quality for various applications.

Product Attributes

Brand: (SHENZHEN SHOUHAN TECHNOLOGY CO., LTD)
Origin: (Shenzhen)
Part Number: TYPE-C16P3MDDGP073
Material Code: TYPE-C16P3MDDGP073

Technical Specifications

Item	Project	Test Conditions	Performance (Specification)
RATING	(Rating)	DC 5V 3A
RATING	(Practical Temperature Range)	-25~85C	-25C~+85C (Use within -25C to +85C)
STANDARD ATMOSPHEIC CONDITIONS	(Test Standard Conditions)	(1) 5~35 (2) 45%~85% (3) 86 Kpa~106Kpa	(1) Temperature: 5C to 35C (2) Humidity: 45% to 85% (3) Pressure: 86 Kpa to 106 Kpa
	(1) BETWEEN BODY AND CONDUCTOR		5C TO 35
	(2) BETWEEN CONDUCTORS NOT TO BE CONTACT		45% TO 85%
MECHANICAL ()	CONNECTION FORCE ()	MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES.	0.5-2.0Kgf
MECHANICAL ()	DISCONNECTI ON FORCE ()	MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES.	0.8~2.0Kgf
ELECTRICAL ()	CONTACT RESISTANCE ()	MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz	40m
INSULATION RESISTANCE ()	APPLY A VOLTAGE OF 100V DC FOR 1 MIN TO FOLLOWING PORTIONS	100M
DIELECTRIC STRENGTH ()	AC 100V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA	WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC
DURABILITY ()	SOLDERA- BILITY TEST ()	THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505 FOR 50.5 SECONDS	(1) SOLDER WETTING TIME SHALL BE 3 SEC OR LESS (2) THE AREA OF SOLDERING SHOULD BE OVER 75%
DURABILITY ()	RESISTANCE TO SOLDERING HEAT TEST ()	REFLOW SOLDERING CONDITIONS: PREHEAT: 180.120s; TALLEST TEMPERATURE: 2605 WITHIN 20 SECONDS. SOLDERING IRON METHOD: BIT TEMPERATURE 3305, APPLICATION TIME 30.5 SEC	WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED
HUMIDITY TEST ()	THE JACK SHALL BE STORED AT A TEMPERATURE OF 402 AND A HUMIDITY OF 90%TO 96% FOR 96 Hr, THEN RECOVERED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr.
HEAT TEST ()	THE JACK SHALL BE STORED AT A TEMPERATURE OF 702 FOR 96 HOURS, THEN RECOVERED AT ROOM TEMPERATURE FOR 1 Hr.	APPEARANCE NO DAMAGE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SATISFIED
COLD TEST ()	THE JACK SHALL BE STORED AT A TEMPERATURE OF -253 FOR 96 HOURS, THEN RECOVERED AT ROOM AMBIENT CONDITION FOR 1 Hr.	APPEARANCE NO DAMAGE, MECHANICAL AND ELECTRICAL CHARACTERISTICS SATISFIED
LIFE TEST ()	WITHOUT LOAD	CONNECTION AND DISCONNECTION SHALL BE MADE FOR 10000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN
LIFE TEST ()	LOAD: AT RATING CONDITION (NON-INDUCTIVE LOAD)	CONNECTION AND DISCONNECTION SHALL BE MADE 10000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN	(1) CONTACT RESISTANCE SHALL BE 0.1 (2) DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N (3) MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED
TEMPARATURE CYCLING TEST ()	5 CYCLES OF SPECIFIED CONDITIONS, THEN ROOM AMBIENT FOR 30 MINUTES.	PRODUCT NO DEFORMATION OR CRACKS. INSERTION & EXTRACTION FORCE: 3 TO 20N. CONTACT RESISTANCE: MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN(BETWEEN TERMINALS)
COLD&HEAT SHOCK TEST ()	5 CYCLES OF SPECIFIED CONDITIONS, THEN ROOM AMBIENT FOR 30 MINUTES.	PRODUCT NO DEFORMATION OR CRACKS. INSERTION & EXTRACTION FORCE: 3 TO 25N. CONTACT RESISTANCE: MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN(BETWEEN TERMINALS)