JUSHUO AFC07-S24ECA-00
Price:
Negotiable
MOQ:
5
Delivery Time:
1工作日
Brand:
AFC07-S24ECA-00
Product Description
Product Overview
The AFC07-S**ECA-00 is a 0.5mm pitch FPC/FFC connector with a locking mechanism, designed for upper connection (H=2.0). It is a right-angle, SMT (Surface Mount Technology) connector suitable for various electronic applications requiring flexible flat cable connections. This series offers reliable electrical and mechanical performance, with a focus on durability and ease of use.
Product Attributes
- Brand: Jushuo ()
- Origin: Shenzhen, China
- Material (Main body): LCP (Natural) UL 94V-0
- Material (Housing Lock): LCP (Black) UL 94V-0
- Material (Terminal/Contact): Phosphor Bronze
- Plating: Metal Gold Plated/Tinning
Technical Specifications
| Item | Description | Requirement |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | AFC07-S**ECC-00 (Small batch tube packaging) | AFC07-S**ECA-00 (Bulk recommended reel packaging) |
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC (Virtual value) 50Hz] | |
| Ambient Temperature Range | -45 +85 | |
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (for 0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX |
| Vibration | DC 1mA energized state; vibration along XYZ three directions; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | DC 1mA energized state; along 6 mutually perpendicular directions; impact at 490m/s{50G}; 3 times each. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% relative humidity air for 96 hours; measured within 0.5 hours after returning to room temperature. | Insulation Resistance: 20 M MIN Appearance: No Damage |
| Temperature Cycling | Mate applicable FPC/FFC; 30 minutes at -452; 10-15 minutes at normal temperature and humidity; 30 minutes at 852; 10-15 minutes at normal temperature and humidity; cycled 5 times. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| Salt Spray | Mate applicable FPC/FFC; 48 hours exposure to 51% salt spray at 352; washed with room temperature water after test; then dried at room temperature. | Contact Resistance: 60 m MAX Appearance: No Damage |
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Solderability | Terminal tip immersed 0.2mm from the reference plane into a tin bath at 2355 for 20.5 sec. | Solder Wetting: 95% coverage |
| Resistance to Soldering Heat | Terminal tip immersed 0.2mm from the reference plane into a tin bath at 2605 for 50.5 sec. | Appearance: No Damage, Deformation |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sellina