SHOU HAN PJ-342 141
Price:
Negotiable
MOQ:
20
Delivery Time:
1工作日
Brand:
PJ-342 141
Product Description
Product Overview
Product Name: PHONE JACK
Model No.: PJ-342 141
Rating: DC 12V 1A
Practical Temperature Range: -30C to +70C
Standard Atmospheric Conditions
(1) Temperature: 5C to 35C
(2) Humidity: 45% to 85%
(3) Pressure: 86 Kpa to 106 Kpa
| Item | Test Conditions | Performance |
|---|---|---|
| Connection Force | Connecting and disconnecting using standard plug gauge 3 times. | 3-30N |
| Disconnection Force | Connecting and disconnecting using standard plug gauge 3 times. | 3-30N |
| Static Load | 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction. | No damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. |
| Contact Resistance | Measured at small current (100mA or less), 1000Hz | <50m |
| Insulation Resistance | Apply a voltage of 500V DC for 1 min to the following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | >100M |
| Dielectric Strength | AC 500V rms (50~60Hz) for 1 min | Trip current: 0.5mA. Without damage to parts: arcing or breakdown etc. |
| Item | Test Conditions | Performance |
|---|---|---|
| Solder Ability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2405C for 30.5 seconds. | (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. |
| Reflow Soldering | Preheat: Temperature on the copper foil surface should reach 180C for 120s after the PCB entered into the soldering equipment. Peak Temperature: Temperature on the copper foil surface should reach the peak temperature of 2605C within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Soldering Iron Method | Bit temperature 3305C. Application time of soldering iron 30.5 seconds. However, excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Heat Test | Store at a temperature of 702C for 96 hours, then subject to controlled recovery. | No damage on appearance, mechanical and electrical characteristics shall be satisfied. |
| Cold Test | Store at a temperature of -253C for 96 hours, then subject to controlled recovery for 1 hour. | No damage on appearance, mechanical and electrical characteristics shall be satisfied. |
| Humidity Test | Store at a temperature of 402C and a humidity of 90% to 96% for 70-20 hours. Then maintain at standard atmospheric condition for 1 hour. | No damage on appearance, mechanical and electrical characteristics shall be satisfied. |
| Life Test | Connection and disconnection shall be made 5000 cycles at a speed of 10 to 20 cycles/min. | (1) Contact Resistance: <0.1 (2) Disconnection Force: 3 to 20N (3) Mechanical and Electrical Characteristics shall be satisfied. |
| Cold & Heat Shock Test | Subjected to cycles of specified conditions and then returned to room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sellina